Description
The Magpul PRO 700 Folding Stock takes a bare Remington 700 short-action barreled action and turns it into a match-ready precision rig. It's a true drop-in upgrade built around a fully machined Type III hard-anodized aluminum skeleton with V-block bedding that cradles the receiver while leaving the barrel free-floated. Magpul then clads that aluminum core in their signature polymer, which cuts down on noise, takes the sting out of cold-weather handling, and gives you comfortable contact points all over the chassis. In Flat Dark Earth, it looks every bit as good as it shoots.
What the PRO 700 Chassis Adjusts For
This thing dials in to you, not the other way around. Length of pull runs from 13.25 to just over 15 inches, the comb gives you a full inch of height adjustment with a secondary locking knob so it stays put, and the butt pad tilts and rises to match your cheek weld. The reversible cheek riser has three fore/aft positions, and the polymer pistol grip slides 0.75 inches fore and aft to nail your trigger reach. Magpul even throws in a second grip with a more aggressive sweep if you want a different hand angle.
Folding, Ambidextrous, and Ready to Travel
The reversible hinge is the star here. Fold the stock and it secures the bolt handle for transport or storage, then snaps back open and locks solid when you're ready to shoot. Length drops to around 23.5 inches folded, which makes packing it into a shorter case a lot easier. The whole platform is ambidextrous too, so lefties and righties are covered with a simple bolt retainer plate swap and a few minutes with a hex wrench.
Building on the PRO 700 Platform
The integrated AICS-pattern magazine well feeds PMAG 5 and PMAG 10 7.62 AC mags along with most other AICS short-action magazines, and the ambidextrous Melonite steel mag release stays low-profile and snag-free. With 21 M-LOK slots across the forend and stock plus multiple QD sockets, there's plenty of room for a bipod, sling, Arca rail, or night vision mount. It accepts factory Remington barrels and aftermarket profiles up to MTU, so it plays nice with most builds.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG802-FDE
- UPC: 840815119487
- Model: Pro 700
- Fit: Remington 700 Short Action (and 700-footprint actions)
- Action Type: Bolt Action
- Color: Flat Dark Earth
- Product Type: Folding Chassis / Stock
- Construction: Type III Hard-Anodized 6061-T6 Aluminum Skeleton with Magpul Polymer Cladding
- Length of Pull: 13.25 in to 15.125 in, adjustable
- Comb Height Adjustment: 1 in range with secondary locking knob
- Cheek Riser: 3-position fore/aft, reversible
- M-LOK Slots: 21 total (forend and stock)
- Magazine Compatibility: AICS pattern; optimized for PMAG 5 & PMAG 10 7.62 AC
- Folded Length: Approximately 23.5 in
- Weight: Approximately 5.4 lbs
What’s Included
- Magpul PRO 700 folding chassis (Remington 700 short action)
- Additional pistol grip with more aggressive sweep and enlarged palm swell
- Magpul PMAG 5 7.62 AC AICS-pattern magazine
- Two action screws (1/4-28 socket head cap screws)
- Swappable bolt retainer plate for right- or left-hand use
- Installation instructions
Frequently Asked Questions
Will the PRO 700 folding stock fit my Remington 700 SPS?
Yes. The PRO 700 is designed for short-action Remington 700 and 700-footprint actions, and the SPS drops right in. Installation is straightforward with the included action screws, and most builders have it mounted in just a few minutes.
What magazines does the Magpul PRO 700 use?
It has an integrated AICS-pattern magazine well that's optimized for Magpul PMAG 5 and PMAG 10 7.62 AC magazines, and it also runs most other AICS-pattern short-action mags. A PMAG 5 comes in the box to get you started. The Melonite steel mag release is ambidextrous and low-profile.
Can left-handed shooters use this chassis?
Absolutely. The PRO 700 is fully ambidextrous. You swap the bolt retainer plate and reverse the folding hinge with a couple of hex wrenches, so it works for right- or left-hand actions without buying a different model.
Does the stock stay put when folded?
It does. When folded, the hinge secures the bolt handle and holds firm for transport or storage without rattling. Deploy it and the stock locks solidly into place for a stable shooting platform, dropping the overall length to roughly 23.5 inches when folded.





Reviews
There are no reviews yet.