Description
Magpul built the MS3 Gen 2 around a simple idea: you shouldn't have to pick between a one-point and a two-point sling. This one does both. When you want maneuverability for room clearing or working in tight quarters, run it as a one-point. When you need stability for a longer carry or steadier shooting positions, clip it into a two-point in seconds. The convertibility is the whole point here, and it works cleanly without leaving you fumbling with extra buckles.
What Sets the MS3 Gen 2 Apart
The standout upgrade on the Gen 2 is the low-profile MS1 slider that replaced the older adjustment loop. It sits flush and out of the way, so you can add or dump tension in two-point mode with one hand, whether you're shouldering the rifle or slinging it across your back. Magpul also lengthened the webbing on this generation, which makes a real difference if you run a plate carrier or you're just a bigger build. The 1-1/4 inch nylon webbing is snag-free with no dangling tails, and it's cut to resist chafing so it doesn't dig in during a long day.
Hardware That Holds Up
The MS3 uses symmetrical Paraclip connectors with positive-locking levers, so once you set it, it stays put with no slipping. Those steel levers are case hardened and finished with a ferritic nitrocarburizing process for serious wear and corrosion resistance, paired with heavy-duty polymer to keep the weight down. The Paraclips also give you genuine quick-release capability if you ever need to ditch the rifle in a hurry, and a cross-bolt lock bar lets you secure the lever closed when you want extra insurance.
Setup and Compatibility
At the rear, the MS3 works with the Magpul ASAP plate for smooth shoulder transitions in one-point mode, along with the SGA receiver mount. Up front it pairs with the RSA, MSA, and M-LOK Paraclip sling mounts, plus most snap-hook loops and standard or QD swivels for two-point use. Length runs 48 to 60 inches with a 10-inch slider adjustment range. It's made in the USA, and the Ranger Green webbing carries a Near Infrared treatment to cut down IR signature.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MS3 Gen 2 (Multi-Mission Sling)
- Manufacturer Part Number: MAG514-RGR
- UPC: 873750010694
- Color: Ranger Green
- Configuration: Convertible 1-Point / 2-Point
- Length: 48 in – 60 in
- Slider Adjustment Range: 10 in
- Webbing Width: 1.25 in
- Webbing Material: Nylon with Near Infrared (NIR) treatment
- Hardware: Symmetrical Paraclip connectors, hardened steel and polymer
- Steel Finish: Ferritic nitrocarburized (Melonite)
- Made In: USA
What’s Included
- Magpul MS3 Gen 2 Sling (Ranger Green)
- Two Paraclip connectors
- MS1 low-profile quick-adjust slider
Frequently Asked Questions
Can the MS3 Gen 2 really switch between one-point and two-point?
Yes, that's the core of the design. The symmetrical Paraclip connectors let you clip and unclip to move between a one-point and two-point setup in seconds, all with one hand. You get the maneuverability of a one-point and the stability of a two-point out of a single sling.
What sling mounts does the Magpul MS3 Gen 2 work with?
At the rear it pairs with the Magpul ASAP plate for one-point shoulder transitions and the SGA receiver sling mount. Up front it works with the RSA, MSA, and M-LOK Paraclip mounts, along with most snap-hook loops and standard or QD swivels for two-point use. Snap-hook loops need an inner diameter of at least 3/8 inch, though 9/16 inch and larger gives you full range of motion.
What's different about the Gen 2 compared to the original MS3?
The biggest change is the low-profile MS1 slider that replaced the older adjustment loop, giving you cleaner one-handed tension changes with less bulk. Magpul also lengthened the webbing so it fits better over armor and works for a wider range of body sizes. Users who owned earlier versions tend to point to the improved slide mechanism as the standout upgrade.
Is the MS3 Gen 2 comfortable to wear all day?
The 1-1/4 inch webbing is wide enough to spread the load without digging in, and it's cut to resist chafing with no loose tails to catch on gear. Combined with the roomier length on the Gen 2, it stays comfortable whether you're running it bare or over a plate carrier.





Reviews
There are no reviews yet.