Description
The Magpul MOE X-22 is one of those upgrades that punches way above its weight, both literally and figuratively. If your Ruger 10/22 is still wearing its factory birchwood or cheap plastic stock, dropping it into this polymer chassis instantly modernizes the feel of the rifle. The whole thing tips the scales at 18.9 ounces, which is a noticeable trim off the front end and shoulder of a factory carbine. Overall length runs 28.6 inches with a fixed 13.5-inch length of pull, keeping the rifle compact and quick to shoulder.
What Sets the MOE X-22 Apart
The pistol grip carries Magpul's TSP texture, giving you a positive, non-slip hold whether your hands are sweaty at the range or cold on a fall morning. Up top you get an ergonomic vertical grip angle that just feels more natural than the old straight-comb design, and the angled polymer butt-plate keeps the rifle planted in your shoulder pocket. Two M-LOK slots sit at the 6 o'clock position under the forend, so mounting a bipod, light, or sling hardware is a bolt-on affair. Integral sling loops on the toe and forend work with standard Uncle Mike's style locking swivels.
Fitting Your Barrel to the X-22
One of the smartest touches here is the pair of interchangeable barrel trays. One tray cradles the skinny factory pencil barrel, and the other opens things up for aftermarket bull barrels up to 0.920 inches in diameter (12.5-inch minimum length). That means whether you're running a bone-stock carbine or a heavier target profile, this stock has you covered without any extra parts to buy. It's a true drop-in fit for standard Ruger 10/22 .22 LR pattern receivers, and it's made right here in the USA.
Installation is about as simple as gun work gets. Pull a couple screws, lift the action out of the old stock, pick the right barrel tray, and set it into the X-22. Most folks have it done in ten minutes with a single screwdriver.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG1428-FDE
- UPC: 840815147589
- Model: MOE X-22
- Fits: Ruger 10/22 .22 LR pattern rifles
- Color: Flat Dark Earth
- Material: Reinforced Polymer
- Weight: 18.9 oz
- Overall Length: 28.6 in
- Length of Pull: 13.5 in (fixed)
- Barrel Compatibility: Factory pencil and bull barrels up to 0.920 in (12.5 in min length)
- Accessory Mounting: Two M-LOK slots at 6 o'clock
- Sling Mounting: Integral loops on toe and forend
- Grip Texture: Magpul TSP
- Country of Origin: USA
What’s Included
- Magpul MOE X-22 stock (Flat Dark Earth)
- Barrel tray for factory pencil profile barrels
- Barrel tray for bull barrels up to 0.920 in
Frequently Asked Questions
Will the MOE X-22 fit my Ruger 10/22 with a bull barrel?
Yes. The stock ships with two interchangeable barrel trays, one for the standard factory pencil barrel and one that opens up for bull barrels up to 0.920 inches in diameter. Just make sure your barrel is at least 12.5 inches long, then pop in the correct tray before dropping in the action.
How hard is the MOE X-22 to install?
It's a straightforward drop-in job that most people finish in about ten minutes. You'll remove the takedown screw from your original stock, lift out the barreled action, choose the right barrel tray, and set everything into the X-22. A single screwdriver is all you need.
How much lighter is the rifle with this stock?
The MOE X-22 weighs just 18.9 ounces, which can shave better than a pound off a rifle wearing a heavier factory or aftermarket stock. That trimmed weight makes the 10/22 feel quicker to point and easier to carry all day in the field.
Can I mount a bipod or sling on the MOE X-22?
Absolutely. There are two M-LOK slots at the 6 o'clock position under the forend for bipods, lights, or M-LOK sling hardware. It also has integral sling loops on the toe and forend that work with standard Uncle Mike's style locking swivels.



Reviews
There are no reviews yet.