Description
Magpul finally cracked the code on fast bipod mounting with the MOE QD. Instead of clamping to a sling stud or fighting a rail adapter, you drop the steel M-LOK stud into any slot on your handguard, give it a quarter turn, and tighten the knob by hand. That's it. The whole thing goes on or comes off in a few seconds, which makes it easy to run one bipod across multiple M-LOK rifles or pull it off entirely when you want a slick forend.
What Sets the MOE QD Bipod Apart
Weight is the headline here. This one comes in right around 9 ounces, roughly 40% lighter than some of Magpul's older bipods, so it doesn't turn the front of your rifle into a boat anchor. The injection-molded polymer body won't deform or crack under recoil, and the bipod plate carries two extra M-LOK lugs that keep everything aligned and locked in tight when the gun starts pushing back against you.
Legs, Feet, and Real-World Use on the MOE QD
The legs pull straight down to deploy and stow with a button push, snapping and locking into place. They run independently from 7 to 10 inches with seven half-inch detents, so you can level up on uneven dirt or dial in a comfortable prone height at the bench. The stepped rubber feet bite well on wood, concrete, and packed ground, and if you want something different they knock out with a roll-pin punch and accept most Atlas-pattern replacement feet.
FDE Finish and Sling Options
The Flat Dark Earth color blends right in with tan and earth-tone builds. Magpul also molded a low-profile sling stud into the rear, so you can still hang a sling off the front without stacking a second M-LOK device on your handguard. It's a clean, no-fuss setup that fits AR-15s, AR-10s, precision rifles, and just about anything else wearing M-LOK slots. Made in the USA.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MOE QD Bipod for M-LOK
- Manufacturer Part Number: MAG1511-FDE
- UPC: 840815149163
- Color: Flat Dark Earth
- Mounting System: M-LOK (direct attach, no adapter)
- Height Range: 7 to 10 inches
- Leg Adjustment: 7 half-inch locking detents, independent legs
- Folded Stack Height: 1.7 inches
- Weight: Approximately 9 oz
- Material: Injection-molded polymer with steel components
- Feet: Non-slip rubber, accepts most Atlas-pattern feet
- Sling Attachment: Integrated low-profile rear sling stud
- Country of Origin: Made in USA
What’s Included
- Magpul MOE QD Bipod for M-LOK (Flat Dark Earth)
- Integral M-LOK attachment stud and knob
- Non-slip rubber feet (installed)
Frequently Asked Questions
How does the MOE QD Bipod attach to my M-LOK handguard?
You insert the steel M-LOK stud into an open slot, rotate the bipod 45 degrees so the stud sits perpendicular to the slot, then tighten the attachment knob by hand until it's snug against the forend. No tools are required, and the whole process takes only a few seconds. The two extra M-LOK lugs on the plate help it stay aligned and lock in place under recoil.
What rifles will the Magpul MOE QD Bipod work with?
It fits any rifle or shotgun with M-LOK slots on the handguard or forend, so AR-15s, AR-10s, and most modern precision or hunting builds are fair game. Since it mounts directly to the slot, you don't need a separate rail or sling-stud adapter. Just make sure you have an open M-LOK slot near the front of your handguard.
Can I swap the rubber feet on this bipod?
Yes. The stepped rubber feet grip most surfaces well out of the box, but they pop out with a roll-pin punch if you want to change them. The legs accept most Atlas-pattern replacement feet, so you can run spikes for soft ground or something wider for the bench.
How much does the MOE QD Bipod weigh and how tall does it get?
It weighs right around 9 ounces, which is about 40% lighter than some of Magpul's earlier bipods. The legs extend from 7 to 10 inches independently with seven half-inch locking positions, and it folds down to a slim 1.7-inch stack height so it stays tucked close to your forend when stowed.




Reviews
There are no reviews yet.