Description
Magpul built plenty of solid bipods over the years, but none of them go on and come off as quickly as the MOE QD Bipod for M-LOK. There's no adapter to fuss with and no tools to dig out of your bag. You drop the steel M-LOK stud into your slot of choice, rotate it 45 degrees counterclockwise so the stud sits perpendicular to the slot, and hand-tighten the knob until it's snug against the forend. A practiced hand can have it locked down in about five seconds, and pulling it back off is just as fast.
What Sets the MOE QD Bipod Apart
Weight is the headline here. At roughly 9 ounces it comes in close to 40% lighter than Magpul's earlier bipods, which you'll appreciate on a lightweight build or anything you carry a lot. The injection-molded polymer body with steel hardware keeps things tough without adding bulk, and the mounting plate carries two extra M-LOK lugs that help the unit align cleanly and stay put under recoil. Folded, it sits at just a 1.7-inch stack height, so it tucks right up against the forend and stays out of the way when the legs are stowed.
Getting Set Up in the Field
The legs deploy and stow with the push of a button, snapping and locking into place, and you can also just pull them down by hand. Each leg adjusts independently from 7 to 10 inches with seven half-inch locking detents, so leveling out on uneven ground or dialing in a comfortable prone position is quick work. The stepped, non-slip rubber feet bite into a wide range of surfaces, from a shooting bench to dirt and rock, and if you have a preference for aftermarket feet, they accept most Atlas-pattern replacements.
Magpul also worked a low-profile sling stud into the rear of the unit, so you can run a sling for easy carry between positions. It's a clean, no-nonsense package for anyone shooting an M-LOK rifle who wants dependable support that goes on and off in a hurry. Made in the USA.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MOE QD Bipod for M-LOK
- Manufacturer Part Number: MAG1511-BLK
- UPC: 840815149156
- Color: Black
- Attachment Type: M-LOK (direct, tool-free)
- Material: Injection-molded polymer with steel hardware
- Weight: Approximately 9 oz
- Leg Height Range: 7 in to 10 in
- Leg Adjustment: 7 locking detents in 1/2-inch increments
- Stack Height (Folded): 1.7 in
- Feet: Stepped non-slip rubber, Atlas-pattern compatible
- Sling Attachment: Integrated low-profile rear sling stud
- Country of Origin: United States
What’s Included
- Magpul MOE QD Bipod for M-LOK (Black)
- Integrated M-LOK mounting hardware
- Installation instructions
Frequently Asked Questions
How does the MOE QD Bipod attach to an M-LOK handguard?
It mounts directly to any M-LOK slot with no adapter or tools needed. You insert the steel M-LOK stud into your slot, rotate the bipod 45 degrees counterclockwise so the stud is perpendicular to the slot, then hand-tighten the knob until it's snug against the forend. Once you've done it a couple times, it goes on in about five seconds and comes off just as fast.
How tall do the legs get and can they be adjusted separately?
Each leg extends from 7 to 10 inches with seven half-inch locking detents, and they adjust completely independently of each other. That lets you level out on uneven terrain or fine-tune your prone height on the fly. A button at the top of each leg handles the adjustment.
How does the MOE QD Bipod compare to Magpul's other bipods on weight?
This is Magpul's lightest bipod, coming in around 9 ounces, which is close to 40% lighter than their earlier models. It also folds down to a 1.7-inch stack height, so it stays tight against your forend when stowed. If you're building a lightweight rifle or carrying a lot, that difference adds up.
Can I swap the feet on the MOE QD Bipod?
Yes. It comes with stepped, non-slip rubber feet that grip well on benches, dirt, and rock, and they're compatible with most Atlas-pattern replacement feet. That gives you room to customize traction for whatever surfaces you shoot from most.




Reviews
There are no reviews yet.