Description
The Magpul MIAD (Mission Adaptable) Gen 1.1 grip is one of those upgrades that quietly makes a rifle feel like your own. It drops right in as a replacement for the standard AR-10 pistol grip, and the whole idea behind it is customization. You get interchangeable front and rear straps so you can tune the grip to your hand size and shooting style instead of settling for whatever came on the rifle. The aggressive texturing wraps the sides and rear backstrap, giving you a solid, no-slip purchase whether your hands are sweaty, gloved, or working in the cold.
What Sets the MIAD Type 2 Apart
This is the Type 2 kit, which matters if you're running a larger 7.62×51 receiver. The Type 2 uses taller backstraps built to fill the gap and fit certain AR-10 style lowers cleanly, including platforms like the Armalite AR-10A/B, KAC SR25, LaRue OBR, LMT .308 MWS, DPMS LR308, and the Smith & Wesson M&P10. If you've got a standard AR-15 or a receiver that takes the shorter straps, the Type 1 kit is the one you'd want instead, so it's worth checking your lower before ordering.
Straps, Cores, and Storage in the MIAD Gen 1.1
Each kit comes loaded with three backstrap sizes (small, medium, large) with both beavertail and no-beavertail options, plus two frontstraps in A1 and A2 profiles so you can run a finger ridge or a smooth face. The Gen 1.1 refresh improved strap retention over the original, so once you set your configuration, it stays put. The removable inner core holds a reusable 1/2 fl oz lubrication bottle, which is a handy spot to stash oil for field maintenance. If you'd rather carry batteries or a spare bolt and firing pin, the grip accepts optional Magpul storage cores that swap right in.
The 25-degree grip angle is the traditional AR feel most people already know, and it pairs well with longer length-of-pull setups. It's made in the USA, all mounting hardware is in the box, and installation is about as simple as backing out one screw and torquing in the new one.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MIAD Gen 1.1 (Type 2)
- Manufacturer Part Number: MAG521GRY
- UPC: 873750008646
- Color: Gray
- Material: Impact-resistant polymer
- Fitment: 7.62×51 / AR-10 type receivers
- Grip Angle: 25 degrees
- Backstrap Options: Three sizes (S, M, L), beavertail and no-beavertail
- Frontstrap Options: Two profiles (A1 and A2)
- Storage: Removable core holds 1/2 fl oz lube bottle, accepts optional Magpul cores
- Country of Origin: Made in USA
What’s Included
- MIAD Gen 1.1 Type 2 grip body
- Three backstraps (small, medium, large)
- Two frontstraps (A1 and A2 style)
- MIAD/MOE lube bottle core with reusable 1/2 fl oz bottle (oil not included)
- Dual-drive mounting screw and mounting hardware
Frequently Asked Questions
Will the MIAD Type 2 fit my AR-10?
The Type 2 kit is built specifically for certain 7.62×51 receivers using its taller backstraps, and it's a confirmed fit for platforms like the Armalite AR-10A/B, KAC SR25, LaRue OBR, LMT .308 MWS, DPMS LR308, and S&W M&P10. Because AR-10 pattern lowers vary between makers, it's smart to confirm your receiver against Magpul's fitment list before installing. If you run a standard AR-15 or a lower that takes the shorter straps, the Type 1 kit is the better match.
What's the difference between the Type 1 and Type 2 MIAD kits?
The main difference is backstrap height. The Type 2 uses taller backstraps designed to close the gap between the grip and larger 7.62×51 receivers for a clean, flush fit, while the Type 1 covers most AR-15/M4 rifles and AR-10 lowers built to that standard. Both kits offer the same interchangeable strap system and storage core compatibility.
Does the MIAD Gen 1.1 grip come with everything I need to install it?
Yes, all mounting hardware is included, along with a dual-drive mounting screw. Installation is straightforward: remove the old grip screw, set your preferred straps, then seat and torque the new grip in place. The only thing you'll add yourself is your choice of oil for the included lube bottle, since oil isn't packaged with the kit.
Can I store more than just oil in the MIAD grip?
The grip ships with the lube bottle core, but the inner core is removable and swaps out for optional Magpul storage cores sold separately. Those let you carry batteries like AA, AAA, or CR123A, or stash a spare bolt and firing pin in a waterproof compartment. It's a nice way to keep essentials on the gun without adding bulk.




Reviews
There are no reviews yet.