Description
The Ruger 10/22 is one of the most popular rifles ever made, but the factory carbine stock leaves a lot on the table. That's where the Magpul Hunter X-22 comes in. It's a full-featured chassis built from high quality reinforced polymer that drops right onto standard 10/22 pattern rifles with no gunsmithing, giving your rimfire a serious ergonomic and modularity upgrade in one shot.
What makes this stock stand out is how much you can dial it in to fit you. The length of pull adjusts through a spacer system that runs roughly 12.5 to 14.5 inches, so shorter and taller folks can both find a comfortable pull. The comb height is adjustable too, which means you can get a proper cheek weld behind whatever optic you mount. Add in the 60 degree grip angle and the non-slip rubber butt pad, and it settles into the shoulder and points naturally whether you're at the bench or walking a squirrel woods.
Building Out Your Hunter X-22
Magpul loaded the forend with M-LOK slots on the sides and bottom, so bipods, sling mounts, lights, and other gear bolt on without adapters. There are dimpled drill points for optional swivel studs and rear QD sling compatibility with the right mount kit. The chassis free floats the barrel too, which helps consistency once you start chasing tighter groups.
Barrel Fit and Compatibility
The reversible barrel tray is one of the smartest touches here. Flip it one way for a factory pencil profile barrel, flip it the other for a heavy bull barrel up to 0.920 inch diameter (12.5 inch minimum length). It also plays nice with all factory Ruger 10/22 magazine capacities and even fits the Thompson/Center T/CR22. Made in the USA, it's rigid, rugged, and ready for years of range time.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG548-BLK
- UPC: 840815101185
- Model: Hunter X-22
- Fits: Ruger 10/22 pattern rifles (also Thompson/Center T/CR22)
- Color: Black
- Material: Reinforced polymer
- Length of Pull: Adjustable, approx. 12.5 to 14.5 in.
- Comb Height: Adjustable
- Grip Angle: 60 degrees from bore axis
- Barrel Compatibility: Pencil profile and bull barrels up to 0.920 in. dia. (12.5 in. min. length)
- Accessory Mounting: M-LOK slots on forend sides and bottom
- Butt Pad: Non-slip rubber
- Installation: Drop-in, no gunsmithing
- Country of Origin: Made in USA
What’s Included
- Magpul Hunter X-22 stock
- Reversible barrel tray
Frequently Asked Questions
Will the Hunter X-22 fit my rifle without any gunsmithing?
Yes. The Hunter X-22 is a true drop-in design for standard Ruger 10/22 .22 LR pattern receivers, so you can move your action over with basic hand tools and no permanent modifications. It's also compatible with the Thompson/Center T/CR22 if you're running one of those.
Does the Hunter X-22 work with a bull barrel?
It does. The reversible barrel tray flips to accommodate factory pencil profile barrels on one side and heavy bull barrels up to 0.920 inch diameter on the other. Bull barrels need to be at least 12.5 inches long to clear properly.
Can I adjust the length of pull and cheek height on the Hunter X-22?
Yes, and that's one of the main reasons people pick this stock. The length of pull adjusts through a rear spacer system spanning roughly 12.5 to 14.5 inches, and the comb height is adjustable so you can line up a solid cheek weld behind your optic.
Does the Hunter X-22 come with sling swivels or accessories?
No, this listing is the stock and its reversible barrel tray only. It's set up with M-LOK slots and dimpled drill points for optional swivel studs and QD sling mounts, so you add the specific sling hardware and accessories you want separately.




Reviews
There are no reviews yet.