0
0

Magpul Hunter 700 Stock for Remington 700 Short Action – Black

UPC: 840815100720

$256.45

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Magpul Hunter 700 takes one of the most trusted bolt guns ever built and gives it a serious ergonomic and modular upgrade without sending anything off to a gunsmith. It's a true drop-in stock for right-hand Remington 700 short actions, built around a reinforced polymer shell wrapped over a Type III hard anodized A380 cast aluminum V-bedding block. That bedding block runs from the recoil lug back to the tang, so the action locks in with no glass bedding needed and the barrel free floats. The barrel channel is generous too, clearing everything from factory sporter contours up to a Medium Palma profile at 0.920 inches, so heavy barrels drop right in.

What the Hunter 700 Brings to Your Setup

Where this stock earns its keep is fit and feel. Length of pull adjusts from 13 to 15 inches in half-inch steps using the included spacers, and comb height can be tuned with optional riser kits to get you lined up behind a scope with proper eye relief. The grip sits at a steeper 60-degree angle for a more vertical, controlled hold, and there's a thick rubber recoil pad on the back to soak up recoil. Folks who swap one in tend to notice the improved balance and the more solid, planted feel right away.

Modularity Built Into the Hunter 700

The forend carries M-LOK slots on the sides and bottom, so bipods, sling mounts, and other accessories bolt on wherever you need them. There are also drill points for standard swivel studs, footman's loops on both sides, and rear QD swivel compatibility. Out of the box it works with your factory Remington hinged floorplate, and when you're ready to run detachable AICS-spec magazines in 5.56×45 or 7.62×51 pattern, Magpul's separate Bolt Action Magazine Well drops in without custom inletting.

Installation is about as easy as it gets: pull two action screws, set the barreled action into the bedding block, torque back to spec, and you're done. Made in the USA, it's a smart way to modernize a hunting rig or build out a precision platform on a budget.

Key Specifications

  • Manufacturer: Magpul Industries
  • Model: Hunter 700
  • Manufacturer Part Number: MAG495-BLK
  • UPC: 840815100720
  • Color: Black
  • Fitment: Remington 700 Short Action, right-hand receivers only
  • Construction: Reinforced polymer shell with Type III hard anodized A380 cast aluminum V-bedding block
  • Length of Pull: 13.0 to 15.0 inches (adjustable with included 0.50 in. spacers)
  • Comb Height: Adjustable with optional riser kits
  • Grip Angle: 60 degrees from bore axis
  • Barrel Compatibility: All factory Remington barrels; aftermarket up to Medium Palma (0.920 in. dia. 5.50 in. forward of breech)
  • Magazine Compatibility: Factory Remington hinged floorplate; upgradeable to AICS-spec mags with optional Bolt Action Magazine Well
  • Accessory Mounting: M-LOK slots on forend sides and bottom, QD swivel cups, footman's loops, swivel stud drill points
  • Weight: 3.0 lbs without action and bottom metal (with two spacers installed)
  • Butt-Pad Dimensions: 1.5 x 5.0 in.
  • Made In: USA

What’s Included

  • Magpul Hunter 700 stock (Black)
  • Rubber recoil butt-pad
  • 0.50 in. length of pull spacers

Frequently Asked Questions

Will the Hunter 700 fit my Remington 700 short action?

It's built for standard Remington 700 pattern short action receivers with factory hinged floorplates, and it fits right-hand receivers only. It accepts all factory Remington barrels plus aftermarket contours up to a Medium Palma at 0.920 inches. If your Model 700 has a blind magazine, you'll need factory hinged bottom metal or the optional Magpul Bolt Action Magazine Well since the belly of the stock is open.

Does the Magpul Hunter 700 stock require bedding or gunsmithing to install?

No, it's a genuine drop-in. The aluminum V-bedding block lets the barreled action seat with no glass bedding required. Most people knock the install out in a few minutes by removing two action screws, setting the barreled action into the stock, and torquing the screws back to spec.

Can I run detachable box magazines with the Hunter 700?

Out of the box it uses your factory Remington hinged floorplate. To switch to detachable AICS-spec magazines in 5.56×45 or 7.62×51 pattern, you add Magpul's separate Bolt Action Magazine Well, which drops in without custom inletting. That upgrade opens the door to Magpul PMAGs and other AICS-pattern mags for faster reloads.

Is the length of pull and comb height adjustable on the Hunter 700?

Yes. Length of pull adjusts from 13 to 15 inches in half-inch increments using the included spacers. Comb height can be raised with optional riser kits sold separately, which helps you line up cleanly behind higher-mounted optics.

Additional information

UPC

840815100720

Manufacturer

Manufacturer Part Number

MAG495-BLK

Action

Color

Black

Model

Product Type

Stock

Style

Adjustable

Reviews

There are no reviews yet.

Be the first to review “Magpul Hunter 700 Stock for Remington 700 Short Action – Black”