Description
The factory stock on a Ruger American does its job, but most folks agree it feels a little hollow and flimsy once you start shooting seriously off a bipod. The Magpul Hunter American Stock in Flat Dark Earth fixes that in a big way. Built from reinforced polymer wrapped around a machine-finished, hard-anodized cast aluminum bedding block with steel recoil lugs, it gives your action a stable, consistent home that shooters have reported tightens up their groups compared to the OEM stock. Best part is it drops right in, no bedding, no gunsmith, just your own hand tools and a bit of patience getting your alignment right before you torque everything down.
What Sets This Hunter American Stock Apart
This is the STANAG version, and that distinction matters. It's made for right-hand, short-action Ruger American Predator and Ranch rifles that already feed from an AR-15 pattern magazine, covering popular chamberings like 5.56 NATO, .300 Blackout, .350 Legend, and 6.5 Grendel. The included bolt-action STANAG magazine well features a locking latch just ahead of the trigger guard, so swapping mags is quick and clean. If you're running a .308-based Ruger American instead, you'll want the AICS-pattern MAG931 version rather than this one.
Dialing In Your Fit
Length of pull adjusts from 13.0 to 15.0 inches using the included half-inch spacers, so taller and shorter frames alike can find a natural shoulder position. The comb comes pre-fitted with a 0.25-inch riser, and optional risers let you raise your cheek weld to line up perfectly behind a scope or thermal. That adjustability is a favorite among predator hunters running short eye relief optics who need to snap up and find their aim fast.
Ready For Your Gear
M-LOK slots run along the sides and bottom of the forend, giving you clean mounting points for a bipod, sling hardware, or whatever else your setup calls for. The forend is flat and stable, which several owners point out keeps the rifle from twisting under bipod tension the way the flexy factory stock does. Push-button QD sling compatibility rounds out the package. Weighing about 3.3 pounds set up, it's a serious, purpose-built upgrade and it's made right here in the USA.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG1207-FDE
- UPC: 840815137986
- Model: Hunter American
- Color: Flat Dark Earth
- Product Type: Rifle Stock
- Fit: Ruger American Short Action, Right-Hand (Predator & Ranch)
- Magazine Compatibility: AR-15 STANAG Pattern
- Supported Chamberings: 5.56 NATO, .300 AAC Blackout, .350 Legend, 6.5 Grendel
- Length of Pull: 13.0 to 15.0 in. (with included 0.50 in. spacers)
- Cheek Riser: Pre-fitted with 0.25 in. riser; optional risers available
- Construction: Reinforced polymer with Type III hard-anodized cast aluminum bedding block and steel recoil lugs
- Accessory Mounting: M-LOK slots on forend sides and bottom, push-button QD compatible
- Weight: Approx. 3.3 lbs (with two spacers and mag well installed)
- Country of Origin: Made in USA
What’s Included
- Magpul Hunter American Stock (Flat Dark Earth)
- Bolt Action Magazine Well – Hunter American, STANAG
- 0.50 in. length-of-pull spacers
- Pre-installed 0.25 in. cheek riser
- Mounting hardware
- Instructions
Frequently Asked Questions
Will the Magpul Hunter American Stock fit my Ruger American?
This STANAG version is built for right-hand, short-action Ruger American Predator and Ranch rifles that already feed from an AR-15 pattern magazine. That covers common chamberings like 5.56 NATO, .300 Blackout, .350 Legend, and 6.5 Grendel. If your rifle is a .308-based short action that uses AICS magazines, you'll want the MAG931 version of the Hunter American instead.
Does this stock require gunsmithing to install?
No. It's a true drop-in stock, so no bedding or gunsmith work is needed and most owners have it done at home in under half an hour. Just take your time getting the action and magazine well aligned before you torque the fasteners down, since rushing that step can affect how mags seat and feed.
What magazines does the included mag well use?
The Hunter American ships with Magpul's bolt-action STANAG magazine well, which accepts AR-15 pattern magazines. It has a locking latch just ahead of the trigger guard for quick, positive mag removal. Magazines themselves are sold separately.
Can I run a bipod on the Hunter American Stock?
Absolutely. M-LOK slots along the sides and bottom of the forend give you solid mounting points for a bipod, sling hardware, and other accessories. Owners regularly note the flat, rigid forend holds steady under bipod tension without the twist you get from the factory stock.



Reviews
There are no reviews yet.