Description
The Magpul CTR Carbine Stock has earned its reputation as one of the go-to upgrades for anyone building or refreshing an AR-15. This is the Mil-Spec version in gray, and it drops right onto standard Mil-Spec sized receiver extension tubes from makers like Colt, Armalite, S&W, and LMT. If your current stock rattles, sticks, or just feels cheap, this is the fix a lot of folks reach for first.
What sets the CTR apart from a bare M4-style stock is the supplemental friction lock. Give the adjustment lever a twist and it snugs the stock down against the buffer tube, taking out the annoying play that robs you of a consistent cheek weld. It's a real "set it and forget it" feel once you dial in your length of pull, which runs from 10.70 inches collapsed to 13.95 inches fully extended across the M4 positions.
Why the Magpul CTR Handles So Clean
The streamlined A-frame profile is more than looks. It keeps the stock from snagging on slings, gear, or the edge of a vehicle, and it shields the release latch so you're not accidentally collapsing your stock at the worst moment. The sloping cheek weld sits comfortably against your face and helps you get behind the sights the same way every time. At right around 8.8 ounces, it keeps the back end of your rifle light and quick.
Sling Options and Everyday Toughness of the CTR Stock
Magpul built in real versatility here. You get an ambidextrous QD sling socket that accepts any push-button swivel, plus footman's loops for traditional slings and a lanyard hole in the toe for paracord rigs. The 0.30-inch rubber butt-pad grips your shoulder and stays put even over body armor or a loaded chest rig. The reinforced polymer construction is proudly made in the USA and holds up to hard use season after season. It's also compatible with Magpul's CTR Cheek Risers if you're running a fixed-length setup or optics that need a higher line of sight.
Key Specifications
- Manufacturer: Magpul Industries
- Model: CTR
- Manufacturer Part Number: MAG310-GRY
- UPC: 873750011523
- Color: Gray
- Product Type: Mil-Spec
- Style: Collapsible
- Fitment: Mil-Spec sized carbine receiver extension tube
- Platform: AR-15 / M16 carbine
- Weight: 8.8 oz (stock only)
- LOP Collapsed: 10.70 in
- LOP Extended: 13.95 in
- Butt-Pad: 0.30 in rubber
- Sling Mount: Ambidextrous QD socket plus footman's loops
- Construction: Reinforced polymer
- Origin: Made in the USA
What’s Included
- Magpul CTR Mil-Spec Carbine Stock (Gray)
- Integrated 0.30" rubber butt-pad
Frequently Asked Questions
Will the Magpul CTR fit my AR-15 buffer tube?
This is the Mil-Spec version, so it fits standard Mil-Spec sized receiver extension tubes found on rifles from Colt, Armalite, S&W, LMT, and most quality builds. If your rifle uses a commercial-spec tube, you'll want the commercial-spec CTR instead since the two diameters aren't interchangeable. When in doubt, measure your tube or check what your lower parts kit came with.
Does the friction lock really get rid of stock wobble?
Yes, that's the whole point of it. Twisting the adjustment lever snugs the stock down against the buffer tube and takes out the slop you get with a plain M4 stock. Keep in mind results can vary slightly depending on your buffer tube's tolerances, but on a quality Mil-Spec tube it locks up nice and tight.
Does the CTR stock come with a QD sling mount?
It does. There's an ambidextrous QD sling socket built in that accepts any push-button swivel, so you can run your sling on either side. You also get footman's loops for a traditional sling and a lanyard hole in the toe for paracord setups.
Can I add a cheek riser to the Magpul CTR?
Absolutely. The CTR is compatible with Magpul's CTR Cheek Risers, which snap into the side slots. They're handy for getting proper eye alignment with optics on a fully extended stock or on rifles without a rear-facing charging handle.





Reviews
There are no reviews yet.