Description
The Magpul MAG941-FDE Bipod clamps straight onto any standard 1913 Picatinny rail and gives you a lightweight, no-nonsense shooting rest that holds up in the field. At just over 11 ounces, it built from Mil-Spec hard anodized 6061-T6 aluminum, stainless steel internals, and injection-molded reinforced polymer, so it shrugs off forward loading and years of hard use without adding a bunch of nose weight to your setup.
What Sets the MAG941 Bipod Apart
Speed is where this bipod shines. The spring-tensioned legs stow forward under the barrel and snap down to lock into place with one hand, and each leg extends a full four inches, from 6.3 to 10.3 inches, across seven half-inch detents you set with the push of a button. A glove-friendly knurled knob sits between the legs and handles both tilt and pan without any tools. You get 50 degrees of total tilt and 40 degrees of total pan, plus the handy ability to lock pan at zero while keeping full tilt. That means you can level up on uneven ground and still stay square on target.
Living With the Magpul 1913 Bipod
Folks who have run this one hard tend to come around to it fast, especially anyone coming off pricier options who expected less. It loads up nicely under forward tension, the soft stepped rubber feet grab both smooth benches and rough ground, and the low-profile housing tucks the mechanisms out of the way so it doesn't snag on gear. Folded up it measures just under 2.3 inches deep and 3.3 inches wide, and tight tolerances keep the squeaks and rattles down.
Feet and Fitment on the FDE Bipod
The feet are held in by a single roll pin, so swapping them is quick. The legs accept most Atlas-pattern replaceable feet, with the Atlas 5-H style being the one exception, so you can tune your ground contact for whatever terrain you shoot on. It a great match for AR-platform builds, recce rifles, and bench work where you want stability without the weight penalty.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG941-FDE
- Model: Bipod
- UPC: 840815119340
- Color: Flat Dark Earth
- Attachment: 1913 Picatinny Rail
- Construction: Mil-Spec Hard Anodized 6061-T6 Aluminum, Stainless Steel Internals, Reinforced Polymer
- Weight: 11 oz
- Leg Length Range: 6.3 in to 10.3 in
- Leg Positions: 7 half-inch detents per leg
- Total Tilt: 50 degrees
- Total Pan: 40 degrees
- Folded Dimensions: Approx. 2.3 in deep x 3.3 in wide
- Feet Compatibility: Most Atlas-pattern feet (except Atlas 5-H)
- Country of Origin: Made in USA
- Style: Swivel
What’s Included
- Magpul MAG941-FDE Bipod for 1913 Picatinny Rail (Flat Dark Earth)
Frequently Asked Questions
What rifles does the Magpul 1913 Picatinny bipod fit?
It mounts directly to any standard 1913 Picatinny rail section, which makes it a natural fit for AR-platform rifles, precision builds, and hunting setups that run a bottom rail. If your rifle uses M-LOK instead, Magpul makes a separate M-LOK version. As long as you have Pic rail up front, this one clamps right on.
Can I change the feet on the MAG941 bipod?
Yes. The feet are held in place by a single roll pin, so removing and swapping them is quick. The legs accept most Atlas-pattern replaceable feet, with the Atlas 5-H style being the lone exception, so you can tailor your ground contact for dirt, rock, or a hard bench.
How much does the Magpul Picatinny bipod weigh?
It tips the scale at just over 11 ounces thanks to the mix of Mil-Spec aluminum, stainless steel internals, and reinforced polymer. That keeps nose weight down compared to a lot of heavier bipods on the market, which matters when you carry a rifle all day. It stays plenty tough despite the light build.
Does the Magpul 1913 bipod tilt and pan?
It does both. A tool-less knurled knob between the legs gives you 50 degrees of total tilt and 40 degrees of total pan, adjustable one-handed between shots. It also has the ability to lock pan at zero while keeping full tilt, which is handy when you only want cant on uneven ground.




Reviews
There are no reviews yet.