0
0

MagnetoSpeed Sporter Barrel-Mount Ballistic Chronograph

UPC: 855036004054

$249.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The MagnetoSpeed Sporter takes all the headache out of chronographing your loads. Instead of fussing with a tripod-mounted optical unit downrange and praying the sun cooperates, this one clamps right onto your barrel and reads each shot as the bullet passes over its electromagnetic sensor. That means no more worrying about light conditions, no wind blowing your setup over, and no walking downrange to reposition after every string. It uses electromagnetic sensors rather than optical ones to sidestep the problems that have frustrated folks using traditional chronographs for years.

Accuracy is where this unit earns its keep. MagnetoSpeed rates their chronographs in the 99.5 to 99.9 percent range, which is plenty tight for load development, confirming your ballistic data, and getting honest numbers off factory ammo. The simple one-button cycling display shows your most recent shot velocity along with running statistics, and setup is about as easy as it gets. Just plug in the sensor to power it on, strap it to the barrel, and start shooting.

What the MagnetoSpeed Sporter Fits

The Sporter is built for barrels measuring half an inch up to one inch in diameter, which covers most contoured sporter-profile hunting rifles and long-barreled revolvers. It will also clear muzzle brakes and flash hiders up to 2.7 inches in length. Keep in mind this model is made for center-fire rifles and revolvers only, so it is not compatible with airguns or rimfire. It also does not work with the Large Brake Adapter or the V3 Rail Adapter.

Living With the Sporter at the Range

The whole kit packs down into an ultra-compact storage container that tucks easily into a range bag. The quick-attach strapping system uses a metal buckle and triad thumb nut to lock the sensor in place fast, and the easy-access battery compartment lets you swap the 9-volt without digging for a screwdriver. Three sensitivity settings let you dial things in for different bullets and setups, and the integral 3.5-foot sensor cord gives you room to position the display where you can read it comfortably while you shoot.

Key Specifications

  • Manufacturer: MagnetoSpeed
  • Model: Sporter
  • Manufacturer Part Number: MS_SPT
  • UPC: 855036004054
  • Sensor Type: Electromagnetic bayonet-style sensor
  • Barrel Diameter Range: 0.5 in to 1 in
  • Muzzle Device Clearance: Up to 2.7 in length
  • Rated Accuracy: 99.5% to 99.9%
  • Display: One-button cycling display (velocity and statistics)
  • Sensitivity Settings: Three
  • Sensor Cord Length: 3.5 ft
  • Power: 9-volt battery (included)
  • Compatibility: Center-fire rifles and revolvers only
  • Color: Black

What’s Included

  • Display unit
  • Bayonet-style sensor (Bayo)
  • Thick and thin rubber V-block spacers
  • Heavy-duty strap with thumb nut tightener
  • Ultra-compact storage container
  • 9-volt battery

Frequently Asked Questions

What barrel sizes does the MagnetoSpeed Sporter fit?

The Sporter is designed for barrels measuring half an inch up to one inch in diameter, which covers most sporter-contoured hunting rifles and long-barreled revolvers. It will also clear muzzle brakes and flash hiders up to 2.7 inches in length. If you have a bull barrel or need to run it over a suppressor, the larger V3 model is the better fit since it handles barrels up to two inches.

How accurate is the MagnetoSpeed Sporter chronograph?

MagnetoSpeed rates their chronographs between 99.5 and 99.9 percent accuracy. Because it reads velocity with electromagnetic sensors mounted right at the muzzle rather than optical sensors downrange, you get consistent numbers regardless of lighting or weather. That makes it a solid tool for load development and verifying factory ammo performance.

Can I use the Sporter with a rimfire rifle or an airgun?

No, the Sporter is built for center-fire rifles and revolvers only. It is not compatible with airguns or rimfire firearms. It also will not work with the Large Brake Adapter or the V3 Rail Adapter.

Is the MagnetoSpeed Sporter hard to set up at the range?

Not at all. You strap the sensor to the barrel with the quick-attach strapping system, plug in the sensor cord to power on the display, and you're ready to shoot. The whole kit stores in a compact container, and the easy-access battery compartment means you can swap the 9-volt without needing a screwdriver.

Additional information

UPC

855036004054

Manufacturer

Manufacturer Part Number

MS_SPT

Color

BALLISTIC CHRONOGRAPH

Length

16.9000

Shipping Weight

0.955

Style

Chronograph

Reviews

There are no reviews yet.

Be the first to review “MagnetoSpeed Sporter Barrel-Mount Ballistic Chronograph”