Description
The 6mm BR family of cartridges has become a staple in precision rifle competitions, but anyone who's tried running them in standard AICS magazines knows the feeding problems. The short, fat case geometry just doesn't play nice with magazines designed for .308-sized rounds. That's exactly what led MDT to develop this dedicated 6mm BR magazine.
MDT 6mm BR Magazine Design
What sets this 12-round magazine apart is its Double Stack to Single Feed (DSSF) transition. Instead of the usual straight stacking you'd find in other AICS mags, this design gradually moves cartridges from a double stack at the base to single-feed at the top. It creates enough internal length to handle your favorite 6mm projectiles while keeping the overall height down—about three-quarters of an inch shorter than a standard 10-round AICS magazine.
Internal ribs guide rounds smoothly through that transition without binding or popping out. The magazine comes factory-ready with a binder plate and spacer already installed, so you're not buying additional kits or spending time tuning feed lips. That's a big deal when you're comparing costs and setup time to other solutions.
Build Quality and Materials
The body is high-strength steel, nitrided for corrosion resistance, then finished with Cerakote Elite inside and out. You get the durability you need whether you're training in wet conditions or running a multi-day competition. A polymer follower and spacer ensure consistent feeding without adding bulk. These magazines feel substantial in hand and aren't prone to denting or warping under rough handling.
Compatibility Note
This magazine works with any AICS-pattern short action rifle, chassis, or bottom metal. Feed reliability has been confirmed across 6mm BR Norma, 6mm BRA, 6mm BRX, 6mm Dasher, and .22 BR. One caveat worth knowing: these don't reliably feed from three-lug actions like Curtis or Terminus without modification. If you're running standard two-lug actions like most Remington 700 clones or modern precision platforms, you're good to go.
Key Specifications
- Capacity: 12 rounds
- Cartridge Compatibility: 6mm BR Norma, 6mm BRA, 6mm BRX, 6mm Dasher, .22 BR
- Pattern: AICS short action
- Material: High-strength steel body with polymer follower and spacer
- Finish: Nitrided steel, Cerakote Elite (black)
- Overall Length: 3.055 inches
- Rear Height: 4.61 inches
- Maximum Cartridge Overall Length: 2.570 inches with binder plate and spacer
- Feed Design: Double Stack to Single Feed (DSSF) transition
- Internal Features: 2 internal ribs for smooth feeding
- Binder Plate: Included, installed
- Manufacturer Part Number: 104174-BLK
- UPC: 709951110614
- Made In: USA
What’s Included
- 1 MDT 12-round 6mm BR AICS metal magazine
- Binder plate (pre-installed)
- Polymer spacer (pre-installed)
Frequently Asked Questions
Will the MDT 6mm BR magazine work with my rifle's action?
This magazine works with any AICS-pattern short action, including standard Remington 700 clones and modern precision chassis systems. However, it does not reliably feed from three-lug actions like Curtis, Terminus, or Ultimatum without modification to the feed lips. If you're unsure about your specific action, check whether it's AICS-pattern two-lug or three-lug before ordering.
Why can't I fit all 12 rounds in the magazine?
The last couple of rounds can be tight when the magazine is brand new due to the stiffness of the spring and the precision tolerances. This breaks in with use. Many users find an MDT magazine loader helpful for easier loading, especially when the magazine is fresh from the box.
Is the binder plate really necessary for feeding?
Yes. The binder plate is what makes this magazine work reliably with short-fat 6mm BR cartridges right out of the box. It holds rounds back and guides them past the feed ramp, solving the feeding issues that plague standard AICS magazines with these cartridges. The plate comes installed and ready to go.
Can I use this magazine with other calibers?
No. This magazine is specifically designed for the 6mm BR family of cartridges. Using it with other calibers will result in poor feeding or damage to the magazine. Each AICS-pattern magazine is caliber-specific, and MDT makes different models for .308 Win, 6.5 Creedmoor, .223 Rem, and other cartridges.


Reviews
There are no reviews yet.