Description
The Lyman .300 Winchester Magnum 2-Die Set covers the core of any .300 Win Mag reloading setup. You get a full-length resizing die fitted with a decapping stem and neck expanding button, plus a bullet seating die, so you can size, deprime, and seat in one straightforward workflow. This is the go-to choice for folks running jacketed bullets through bottleneck rifle cases, whether you're building long-range loads or stocking up for hunting season.
What the Lyman .300 Win Mag Die Set Brings to the Bench
Lyman machines these dies from steel, then heat treats them for toughness and gives the sizing die a final micro-finish polish for extra smoothness on the downstroke. The sizing die is vented, which lets trapped air escape so it won't dent or damage your case necks and shoulders as you work the ram. The seating die comes set up with a stem shaped for pointed bullets, which is exactly what most .300 Win Mag shooters are feeding their rifles.
Fitting the Lyman 2-Die Set to Your Press
Both dies use the standard 7/8"-14 thread, so they'll thread right into any common single-stage or turret press without an adapter. If you're loading cast bullets instead of jacketed, Lyman recommends adding a separate neck expanding die to properly open the case mouth. Keep in mind a shellholder is sized to the cartridge and sold separately, so grab the correct one for the .300 Win Mag case head if you don't already have it.
Lyman has been making reloading gear longer than just about anybody, and these die sets have a well-earned reputation for holding tolerances load after load. For the .300 Win Mag reloader who wants dependable, repeatable ammo without overcomplicating the process, this set hits the mark.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7455647
- UPC: 011516756473
- Caliber: .300 Winchester Magnum
- Set Type: 2-Die Rifle Set
- Dies Included: Full-Length Resizing Die, Bullet Seating Die
- Thread Size: 7/8"-14 (fits all popular presses)
- Sizing Die Features: Vented, decapping stem, neck expanding button
- Seating Stem: Configured for pointed bullets
- Intended Use: Jacketed bullets in bottleneck rifle cases
- Construction: Heat-treated steel with micro-finish polish
- Country of Manufacture: United States
What’s Included
- Full-length resizing die with decapping stem and neck expanding button
- Bullet seating die
- Lyman storage box
- Instructions
Frequently Asked Questions
What comes in the Lyman .300 Win Mag 2-die set?
The set includes a full-length resizing die and a bullet seating die. The sizing die is fitted with a decapping stem and neck expanding button, so it sizes the case and knocks out the spent primer in one stroke. A shellholder is not included and is sold separately, so make sure you have the correct one for the .300 Win Mag case head.
Will these Lyman dies fit my reloading press?
Yes. Both dies use the industry-standard 7/8"-14 thread, which fits virtually all single-stage and turret presses on the market. You won't need an adapter to run them.
Can I load cast bullets with this die set?
This set is built primarily for jacketed bullets in bottleneck rifle cases, and the included seating stem is shaped for pointed bullets. If you want to load cast bullets, Lyman recommends adding their separate neck expanding die to open the case mouth properly. For most .300 Win Mag shooters running jacketed projectiles, the set as-is has you covered.
Does the sizing die being vented actually matter?
It does. The vent lets trapped air escape as the case enters the die, which prevents the pressure from denting or deforming your case necks and shoulders. It's a small detail that helps keep your brass in good shape over repeated loadings.




Reviews
There are no reviews yet.