0
0

Lyman Pro Series Micrometer Taper Crimp Die – 6.5 Creedmoor

UPC: 011516746306

$101.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimping a 6.5 Creedmoor is one of those steps that separates fussy reloaders from everyone else, and this die is built for the folks who want it dialed in and repeatable. The Lyman Pro Series Micrometer Taper Crimp Die gives you a taper crimp instead of a roll crimp, which means the case mouth is gently drawn in toward the bullet rather than rolled over into a cannelure. That matters on a cartridge like the Creedmoor, where a lot of match and hunting bullets don't have a crimp groove and you still want a touch of bite without working the brass too hard or messing with your overall length.

What Sets the Lyman Pro Series Taper Crimp Die Apart

The star here is the micrometer-adjustable head. Instead of loosening a lock ring and guessing, you turn the dial to shift the floating crimp sleeve by a few thousandths at a time. Find the setting your load likes, write it down, and you can come right back to it next session. That floating sleeve is the other smart piece. It self-centers on the case as it comes up, so the crimp lands evenly all the way around instead of favoring one side.

Why Stainless Steel Matters on the Press

The whole die is machined from corrosion-resistant stainless steel. If you've ever pulled a neglected die out of a drawer and found surface rust, you'll appreciate this. It shrugs off humidity and the oils from your hands, and it keeps that clean look through years of use. These dies run fine in single-stage, turret, and progressive presses, so they'll fit right into whatever setup you're already loading on.

Getting the Most From It on Your 6.5 Creedmoor Loads

Taper crimp is a light touch by design. It snugs the case mouth around the bullet to help resist movement and clean up any flare, without crushing neck tension the way an over-aggressive crimp can. Plenty of Creedmoor loaders run no crimp at all and lean on neck tension, but if you're shooting mono bullets, loading for a gas gun, or chasing tighter consistency, a measured taper crimp from a die like this is a solid tool to have on the bench.

Key Specifications

  • Manufacturer: Lyman
  • Caliber: 6.5 Creedmoor
  • Die Type: Micrometer Taper Crimp Die
  • Series: Lyman Pro Series
  • Adjustment: Micrometer-adjustable head
  • Crimp Sleeve: Floating, self-centering
  • Material: Corrosion-resistant stainless steel
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 7704630
  • UPC: 011516746306
  • Shipping Weight: 0.675 lb

What’s Included

  • Lyman Pro Series Micrometer Taper Crimp Die (6.5 Creedmoor)

Frequently Asked Questions

What's the difference between a taper crimp and a roll crimp for 6.5 Creedmoor?

A taper crimp gently draws the case mouth tighter around the bullet without rolling it into a cannelure, so it doesn't change your overall cartridge length. A roll crimp pinches the case into a crimp groove and is better suited to cannelured bullets. Since many 6.5 Creedmoor match and hunting bullets have no cannelure, a taper crimp is the cleaner choice when you want a little extra security.

How does the micrometer head on the Lyman Pro Series die work?

The micrometer-adjustable head lets you move the floating crimp sleeve in small, measurable increments rather than eyeballing it. You turn the dial to fine-tune crimp by a few thousandths of an inch, note your setting, and return to that exact spot on your next loading session. It takes the guesswork out of repeating a load you already like.

Do I even need to crimp my 6.5 Creedmoor handloads?

Plenty of bolt-gun loaders skip crimping entirely and rely on neck tension to hold the bullet, and that works great for a lot of setups. A light taper crimp becomes worth considering if you're loading for a semi-auto, running mono bullets that feel like they need a touch more bite, or trying to tighten up velocity consistency. The idea is a gentle snug, not a hard squeeze that works the brass too much.

Will this die fit my press?

Yes, it uses a standard 7/8-14 thread and works in single-stage, turret, and progressive presses, so it drops right into whatever you're already loading on. It's a dedicated crimp die, meaning you run it as a separate station after seating your bullets. You'll still need your sizing and seating dies to complete the full process.

Additional information

UPC

011516746306

Manufacturer

Manufacturer Part Number

7704630

Shipping Weight

0.675

Reviews

There are no reviews yet.

Be the first to review “Lyman Pro Series Micrometer Taper Crimp Die – 6.5 Creedmoor”