0
0

Lyman Pro Micrometer Seating Die 40 S&W/10mm Stainless 7704370

UPC: 011516743701

$86.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load 40 S&W or 10mm and want seating depth you can repeat round after round, this is the die that gets you there. The Lyman Pro Micrometer Seating Die uses a micrometer-adjustable head so you can change your bullet seating depth a few thousandths at a time without guesswork. The head is marked in .001-inch increments, so when you find the overall length your pistol likes, you can write it down and dial right back to it next session.

Inside the die, a floating seating punch centers the bullet on the case before it ever presses in. That is what keeps run-out to a minimum and gives you cleaner, more consistent ammo. Because these cartridges headspace on the case mouth, the die also carries a built-in roll-crimp shoulder you can use or ignore depending on how you like to finish your rounds. Being a pistol-caliber Pro die, it ships with an extra seating stem so you can swap between round nose and hollow point projectiles.

How the Pro Micrometer Seating Die Earns Its Keep

Lyman built the Pro line with progressive and automated presses in mind, which means tight tolerances and smooth cartridge feeding when you are running volume. That said, it threads into any standard 7/8-14 station, so single-stage and turret reloaders get the same precision. The whole die body is machined from stainless steel, so it shrugs off rust and keeps looking sharp through years of use.

Who Reaches for the 40 S&W/10mm Seating Die

This one makes sense for anyone chasing match-grade consistency in their pistol loads or loading enough rounds that repeatable settings save real time. Competitive shooters, high-volume plinkers, and reloaders who just like their ammo dialed in will appreciate how quickly it returns to a known setting. Pair it with a Lyman Pro carbide sizing die and taper crimp die and you have a complete 40 S&W/10mm bench setup.

Key Specifications

  • Manufacturer: Lyman
  • Manufacturer Part Number: 7704370
  • UPC: 011516743701
  • Cartridge: 40 S&W / 10mm Auto
  • Die Type: Micrometer Bullet Seating Die
  • Adjustment: Micrometer head marked in .001-inch increments
  • Seating Punch: Floating, centers bullet for minimal run-out
  • Crimp: Built-in roll-crimp shoulder (optional use)
  • Thread: 7/8-14 standard
  • Material: Corrosion-resistant stainless steel
  • Press Compatibility: Progressive, turret, and single-stage presses
  • Color: Silver / Stainless

What’s Included

  • Lyman Pro Micrometer Seating Die (40 S&W/10mm)
  • Extra seating stem for round nose or hollow point bullets
  • Instructions

Frequently Asked Questions

Is the Lyman Pro Micrometer Seating Die a full die set or just the seater?

This is the standalone micrometer seating die only, not a complete set. If you need sizing, flaring, and crimping too, you would add those separately or step up to a Lyman Pro die pack for 40 S&W/10mm. Many reloaders buy the micrometer seater on its own to upgrade the seating step in an existing die setup.

Will this die work on my progressive press?

Yes. Lyman designed the Pro line specifically with progressive and automated presses in mind, so it feeds and runs smoothly during high-volume sessions. It uses a standard 7/8-14 thread, so it also drops right into turret and single-stage presses with no trouble.

Does it handle both round nose and hollow point bullets?

It does. Lyman includes an extra seating stem with the pistol-caliber Pro seating dies, so you can swap stems to match round nose or hollow point profiles. Check beneath the packing material, since the spare stem is sometimes tucked in there.

How precise is the micrometer adjustment?

The micrometer head is marked in .001-inch increments, so you can fine-tune seating depth a few thousandths at a time and dial right back to a setting you liked. Combined with the floating seating punch that centers the bullet on the case, it keeps run-out low and your overall length consistent from round to round.

Additional information

UPC

011516743701

Manufacturer

Manufacturer Part Number

7704370

Shipping Weight

0.915

Reviews

There are no reviews yet.

Be the first to review “Lyman Pro Micrometer Seating Die 40 S&W/10mm Stainless 7704370”