Description
Lyman put its name on reloading dies a long time ago, and this .380 Auto set is a great example of why so many loaders keep reaching for them. The big draw here is the tungsten carbide sizing ring. Because carbide handles straight-wall pistol brass so smoothly, you can skip the case lube step entirely, which speeds up a bench session and keeps your brass clean. Lyman pioneered the carbide sizing die, so this is the real deal, not a budget imitation.
Inside the Lyman .380 Auto Carbide 3 Die Set
You get three dies: a full-length sizing die with a one-piece hardened steel decapping rod, the two-step neck expanding M die, and a bullet seating die. The sizing die resizes the case and knocks out the spent primer in one stroke. The M die is a Lyman original, and loaders who run cast or jacketed bullets appreciate how its two-step plug conditions the case mouth. The first step opens the mouth slightly, and the second step adds just enough belling to seat a bullet square without overworking the brass. That makes it tough to crush a case and easy to feel when you've got the setup right.
Why the Carbide Sizing Ring Matters
The .380 is a small, straight-wall case, and tiny cases can be fiddly to load. A solid carbide ring cuts down the effort needed to size, resists wear over tens of thousands of rounds, and keeps dimensions consistent from the first case to the last. The seating die includes extra seating screws to fit different bullet nose shapes, so round nose and truncated cone projectiles both get proper contact and alignment.
Fits Your Existing Setup
These dies use the industry-standard 7/8 inch by 14 threads, so they drop right into single-stage, turret, and progressive presses from all the common brands. All-steel construction means they'll hold up on a busy bench. If you're loading .380 Auto in any volume, this set gives you the tools to turn out clean, uniform ammo without the lube hassle.
Key Specifications
- Manufacturer: Lyman
- Caliber: .380 Auto (380 ACP)
- Type: Reloading Pistol Die Set
- Number of Dies: 3
- Sizing Die Material: Tungsten Carbide sizing ring
- Body Construction: All steel
- Thread Size: 7/8" x 14 (industry standard)
- Case Lube Required: No
- Manufacturer Part Number: 7680112
- UPC: 011516701121
- Shipping Weight: 1.6875 lbs
What’s Included
- Full-length carbide sizing die with one-piece hardened steel decapping rod
- Two-step neck expanding (M) die
- Bullet seating die
- Extra seating screws for round nose and truncated cone bullets
Frequently Asked Questions
Do I need case lube with the Lyman .380 Auto Carbide Die Set?
No, that's the main benefit of the carbide sizing die. The tungsten carbide ring lets you size straight-wall .380 brass without lubing each case, which saves a step and keeps your brass and hands clean. Some loaders still run a light dry lube for high-volume sessions, but it isn't required.
Will this die set fit my press?
Yes, Lyman dies use the industry-standard 7/8 inch by 14 threading, so they thread into all popular single-stage, turret, and progressive presses. You'll just need the correct .380 Auto shellholder for your press, which is sold separately.
Can the Lyman .380 Auto set seat both round nose and truncated cone bullets?
It can. The seating die comes with extra seating screws so you can match the stem to your bullet's nose profile, whether that's round nose or truncated cone. Swapping the screw keeps the bullet aligned and seated to a consistent depth.
What does the two-step M expander die actually do?
The M die opens the case mouth in two stages instead of a single taper. The first step expands slightly to just over bullet diameter, and the second adds a small flare so the bullet sits square on the case mouth before seating. It's a Lyman original that makes it tough to crush small cases and works especially well with cast bullets.





Reviews
There are no reviews yet.