Description
Once your parts come out of an ultrasonic cleaner, they're stripped down to bare metal with zero protection, and any water hiding in a crevice is a rust problem waiting to happen. That's the job this jug handles. Lyman Turbo Sonic Gun Lubricant is built as the second stage of the ultrasonic process, going in after the cleaning solution to displace lingering moisture and lay down a protective coating that reaches spots a rag and a bottle of oil never will.
How the Turbo Sonic Gun Lube Fits Your Cleaning Routine
The workflow is simple. Run your parts through the cleaning solution, rinse and drain, then move them into a tank or a lube pan filled with the Turbo Sonic lubricant and run another short cycle. The cavitation drives the lube into pins, springs, and the corners of a frame you'd never reach by hand. When the parts come out and dry, you're left with a thin protective film rather than a greasy, dripping mess. Most folks run the lube step for a few minutes, drain, and let everything air dry before reassembly.
Why the Gallon of Turbo Sonic Makes Sense
This lubricant is made to be reused. The same batch can carry you through cycle after cycle, which is exactly why the gallon size is popular with anyone cleaning in volume, from gunsmiths and repair shops to folks who shoot enough to keep an ultrasonic unit on the bench. It pours in ready to use with no dilution, no heating, and no fuss.
Worth knowing: this is a moisture-displacing conditioning lube meant to work with the ultrasonic process, not a heavy grease for high-friction rails. It protects and preserves cleaned parts beautifully, and if a particular contact point needs a heavier film, you can always add a dab of your usual oil or grease at reassembly. For clean, corrosion-free parts straight out of the tank, this is the stuff that finishes the job right.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7631735
- UPC: 011516717351
- Size: 1 Gallon
- Type: Ultrasonic gun parts lubricant / conditioner
- Form: Liquid
- Application: Post-ultrasonic cleaning lubrication and moisture displacement
- Ready to Use: Yes, no mixing or heat required
- Reusable: Yes, can be reused for repeated cycles
- Finish: Dry protective lubricating film
What’s Included
- One 1-gallon jug of Lyman Turbo Sonic Ultrasonic Gun Lubricant
Frequently Asked Questions
Do I need to mix or dilute the Turbo Sonic gun lubricant?
No, it's ready to use right out of the jug at full strength. There's no water to add and no heat required. Just pour it into your ultrasonic tank or lube pan and run your cycle.
Can I reuse the Lyman Turbo Sonic lubricant, or is it a one-time-use product?
It's designed to be reused across multiple cycles, which is a big part of why the gallon size is worth it for anyone cleaning regularly. Keep it covered and stored between sessions and a single batch will carry you through many rounds. That reusability is exactly what makes it practical for gunsmiths and high-volume users.
Is this Turbo Sonic lubricant meant for use after ultrasonic cleaning specifically?
Yes, this is the lubrication stage that follows the cleaning solution. Ultrasonic cleaning strips parts down to bare metal and removes all the old oil, so a relube step is essential to prevent rust. The Turbo Sonic lube displaces any leftover water and leaves a protective film on every surface the cavitation reaches.
Does this replace my regular gun oil for the rails and high-wear points?
Think of this as a protective conditioning lube that coats and preserves cleaned parts rather than a heavy grease for high-friction surfaces. It leaves a dry protective film that guards against corrosion beautifully. If a specific contact point like slide rails needs a heavier film, add a bit of your usual oil or grease when you reassemble.





Reviews
There are no reviews yet.