Description
Lyman kicked off the whole tungsten carbide sizing die idea along with the "Multi" concept, and this .45 Colt set is a direct descendant of that history. The carbide sizing ring means you can skip the case lube step entirely, which is a real time saver when you're sizing a bin full of brass. It's an all-steel, three-die set built around the demands of folks who load the big bore in quantity, whether that's cowboy action loads, plinking fodder, or heavier hunting rounds.
What Comes in the Lyman Multi-Deluxe 45 Colt Set
You get three dies: a full-length tungsten carbide sizing die with a one-piece hardened steel decapping rod, a two-step neck expanding die, and a bullet seating die. That decapping rod is heat-treated tool steel, so it holds up even when you're knocking out crimped primers. The two-step expander is another Lyman original and it opens the case mouth in stages, which helps seat cast and jacketed bullets cleanly without shaving lead or crumpling brass.
Why the Extra Seating Screws Matter
The standout feature of the Lyman AA Multi-Deluxe set is the bonus seating screws. The .45 Colt gets loaded with everything from round nose to semi-wadcutter to flat point bullets, and swapping in the matching seating screw gives you better contact and alignment on whatever profile you're running. It's a small touch that makes a noticeable difference in how square your bullets seat.
Press Compatibility
These dies thread in at the industry standard 7/8-14, so they'll run in just about any single-stage or turret press from the major brands. Each sizing die is vented, polished, and heat-treated, with a final micro-finish that keeps brass moving smoothly through the die. The whole set ships in a plastic storage case to keep things organized on the bench.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7680110
- UPC: 011516701107
- Caliber: .45 Colt (Long Colt)
- Set Type: 3-Die Set (Multi-Deluxe)
- Sizing Die: Full-Length Tungsten Carbide
- Decapping Rod: One-Piece Hardened Steel
- Expander: Two-Step Neck Expanding Die
- Thread Size: 7/8-14
- Material: All Steel
- Case Lube Required: No
- Country of Origin: USA
What’s Included
- Full-length tungsten carbide sizing die
- One-piece hardened steel decapping rod
- Two-step neck expanding die
- Bullet seating die
- Extra seating screws for popular bullet nose shapes
- Plastic storage case
Frequently Asked Questions
Do I need case lube with the Lyman 45 Colt carbide die set?
No, the tungsten carbide sizing ring lets you size straight-wall .45 Colt brass without lubricating your cases first. That saves you a step and keeps the process cleaner. If you're loading in volume, that convenience adds up fast.
Will these dies fit my press?
Yes, the Lyman Multi-Deluxe dies use the standard 7/8-14 thread, so they'll thread into virtually any single-stage or turret press from the major brands. That includes popular presses from RCBS, Hornady, Lee, and others. No adapters needed.
What are the extra seating screws for?
The .45 Colt is loaded with a wide range of bullet profiles, from round nose to semi-wadcutter to flat point. The included seating screws let you match the seating stem to your bullet shape for better alignment and cleaner seating. Just swap in the one that fits your bullet.
Can this set load both lead and jacketed bullets?
Yes, the two-step neck expanding die opens the case mouth in stages, which helps seat both cast lead and jacketed bullets without shaving or damaging them. Combined with the matched seating screws, it handles a broad mix of .45 Colt bullet types with ease.





Reviews
There are no reviews yet.