$12.17
35 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The A1 birdcage is one of the most recognizable muzzle devices in the AR world, and Luth-AR built theirs to do exactly what the original was designed to do. This is the eight-slot, open-around-the-body design that showed up on M16A1 rifles back in the day, and it still earns its keep on modern .223 Rem and 5.56 NATO builds. It cuts down the visible flash coming off the muzzle and takes a bit of the harshness out of the shot, all while keeping that clean, symmetrical look a lot of builders still go after.
The main thing to know is the slot pattern. The A1 has ports running all the way around the body, while the later A2 style closes off the bottom to steer gas upward and knock down dust when you are shooting prone. Neither one is wrong, it really comes down to the look and feel you want. If you are putting together a retro rifle, an A1-era clone, or you just prefer the traditional profile, the A1 is the one you want on the end of your barrel. It is short, tough, and does its job without any fuss.
Luth-AR machines this one from 4140 chrome moly steel and finishes it in manganese phosphate, so it shrugs off corrosion and holds up to plenty of range time and heat. The parkerized finish gives it that flat, no-shine military look that pairs with just about any handguard or barrel out there.
This threads onto the standard 1/2×28 muzzle threads found on the vast majority of .223 and 5.56 AR-15 barrels, so for most folks it is a straight swap. You will want a crush washer or peel washer to get it timed and torqued down right. If you have got a wrench and a few minutes, this is an easy job to knock out at home.
It uses 1/2×28 threads, which is the standard muzzle thread pitch on the large majority of .223 Rem and 5.56 NATO AR-15 barrels. As long as your barrel is threaded 1/2×28, this is a direct fit. It is always worth double checking your specific barrel's thread pitch before you order.
The A1 has slots running all the way around the body, while the A2 closes off the bottom section. That closed bottom on the A2 directs gas upward to help fight muzzle rise and reduce the dust kicked up when firing prone. The A1 gives you the older, more symmetrical look that a lot of retro and classic builds are after.
No, this device ships on its own without a crush washer. You will want to grab a 1/2×28 crush washer or peel washer separately to time and torque it correctly. It is an inexpensive add-on and makes the install go smoothly.
The A1 pattern does a solid job knocking down visible flash for a compact, robust device, which is exactly what it was designed to do. It won't match a dedicated long-body flash suppressor, but for a short, durable everyday muzzle device it holds its own. The 4140 chrome moly build and manganese phosphate finish keep it dependable through plenty of range time.
| UPC | 812058032663 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BL-06-A1 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Product Type | Flash Hider |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.