$134.00
21 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Volquartsen HP Action Kit is the go-to upgrade for anyone who loves their Ruger 10/22 but has grown tired of the vague, heavy factory trigger. Instead of just swapping one part, this kit rebuilds the guts of your fire control group with target-grade components. You get a target hammer with shims and bushings, a hammer spring, a target disconnector, a target sear, and a target trigger with a polished plunger and spring set up for overtravel adjustment. There's also a recoil buffer in the box that cushions the metal-on-metal slam between the bolt and receiver, which cuts down on wear and takes some of the harshness out of the action.
The headline number here is the pull weight. Once installed and tuned, this kit brings the trigger down to roughly 2.25 to 2.5 pounds, a huge change from the 5 to 6 pounds most factory 10/22s ship with. The result is a lighter, cleaner break with a crisp wall and adjustable overtravel, which is exactly what you want for small targets, rimfire matches, or just ringing steel at the range. Less finger drag and a shorter reset make it far easier to stay steady through the shot.
This is a genuine gunsmithing project, not a five-minute drop-in. Plenty of folks install it themselves with basic tools and the instructions or install video, but some rifles need light fitting to get everything cycling smooth and returning fully. If you're comfortable inside a 10/22 trigger group, you'll be fine. If not, having a gunsmith handle it is money well spent. It's built for the Ruger 10/22 platform, and the parts feature the fit and finish Volquartsen has been known for since the 1970s.
Bonus tip: keep all lubricant off the hammer notch and sear face during assembly, and always confirm the safety functions correctly before you shoot.
Once the kit is installed and dialed in, the trigger pull drops to roughly 2.25 to 2.5 pounds. That's a big improvement over the 5 to 6 pounds a stock 10/22 typically comes with. You'll notice a cleaner break and a much lighter, more predictable feel.
Many rifles will accept it with straightforward assembly, but this is more of a gunsmithing job than a pure drop-in. Some trigger housings need light fitting so the trigger returns fully and everything cycles smoothly. If you're not comfortable working inside a 10/22 trigger group, a gunsmith can install it for you.
No, those extras come with the HP Action Kit Plus version. This is the standard HP Action Kit, which focuses on the target hammer, sear, disconnector, trigger, springs, and recoil buffer. If you want the mag release and auto bolt release added, look for the Plus configuration instead.
The recoil buffer is a polymer stop that sits between the bolt and receiver to eliminate the metal-on-metal contact when the bolt cycles back. This cuts down on wear to the action and reduces vibration, making the rifle feel a touch smoother. It's a small part that makes a noticeable difference over time.
| UPC | 810162010584 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | VC10HP-B-10 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.