Description
If you've ever run a Magpul MOE, CTR, or STR stock, you already know the factory buttpad is basically a slab of hard plastic. It works, but it does nothing to soak up recoil and it likes to slide around on your gear. The Limbsaver Magpul Stock Recoil Pad fixes both problems in a few minutes. It's a direct-fit rubber pad built from Limbsaver's NAVCOM material, the same vibration-dampening compound they've used for years across their rifle and shotgun lineup, and it's made right here in the USA.
NAVCOM stands for Noise and Vibration Control Material, and the short version is that it absorbs a wide band of energy frequencies instead of just cushioning the initial jolt. On paper Limbsaver rates it at up to 60% felt recoil reduction. In the real world it makes a bigger difference than you'd expect on the harder-kicking builds. Guys running .308 small-frame ARs, AR-10s, and 300 Blackout rifles tend to notice it most, and it's a favorite for anyone shooting through a shoulder injury who just wants to stay comfortable through a long range session.
What the Limbsaver Magpul Pad Actually Fits
This one is model-specific, so pay attention to your stock. It's made for the original Magpul MOE, CTR, and STR stocks, and it also plays nice with the ACS, ACS-L, and Gen 1 UBR. It does not fit the MOE-S, MOE-SL, or MOE-SLS stocks, since those use a different hole pattern on the buttplate. If you've got a standard M4-style stock from another maker, Limbsaver builds a separate pad for that.
Installing the Magpul Stock Recoil Pad
Installation is about as simple as it gets. Pull the two screws holding your factory Magpul pad, set the Limbsaver pad in its place, and thread the screws back in. Worth knowing up front: mounting hardware isn't included, so you'll reuse your original stock screws. The pad adds roughly an inch to your length of pull, which is usually a welcome change for taller folks or anyone shooting in a heavy jacket. The soft rubber surface has real grip to it, so it holds position on wet or slick clothing where the plastic pad would slip.
Key Specifications
- Manufacturer: Limbsaver
- Manufacturer Part Number: 10025
- Model: Magpul Stock Recoil Pad
- UPC: 697438100251
- Fits: Magpul MOE, CTR, STR, ACS, ACS-L, UBR (Gen 1)
- Material: NAVCOM rubber (Noise and Vibration Control Material)
- Felt Recoil Reduction: Up to 60%
- Added Length of Pull: Approximately 1 inch
- Surface: Non-slip
- Color: Black
- Style: Pre-Fit
- Country of Origin: USA
What’s Included
- Limbsaver Magpul Stock Recoil Pad (one pad)
Frequently Asked Questions
Will the Limbsaver Magpul recoil pad fit my MOE-SL or MOE-S stock?
No, this pad is made for the original Magpul MOE, CTR, and STR stocks, along with the ACS, ACS-L, and Gen 1 UBR. The MOE-S, MOE-SL, and MOE-SLS stocks use a different buttplate hole pattern, so this pad won't line up on them. If you're running one of those, you'll want a pad designed specifically for that style.
Does the Magpul Stock Recoil Pad come with mounting screws?
It does not include mounting hardware. You'll reuse the two screws that already hold your factory Magpul buttpad in place. Just back those out, swap in the Limbsaver pad, and thread them back in.
How much does this pad reduce recoil?
Limbsaver rates the NAVCOM material at up to 60% felt recoil reduction. The difference is most noticeable on harder-kicking builds like AR-10s, .308 small-frame ARs, and other larger calibers. On a light-recoiling round like 5.56 the effect is more subtle, but the added cushion and grip still make for a more comfortable, planted feel.
Will this change my length of pull?
Yes, the pad adds roughly an inch to your length of pull compared to the thin factory Magpul pad. That's usually a plus for taller shooters or anyone who runs a lot of layers, but it's worth keeping in mind if your stock is already set up right at the edge of your reach.





Reviews
There are no reviews yet.