$26.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is Leupold's Standard (STD) one-piece scope base, built specifically for right-hand, short-action Savage 10 through 16 rifles with a round receiver and the Accutrigger setup. It's machined from steel for a rock-solid foundation, and the silver finish is a clean match for a stainless barreled action. One-piece construction gives you maximum rigidity across the receiver, which is exactly what you want when you're building a dependable hunting or range rig.
The STD system has been around a long time because it works. The front of the base accepts a dovetail-style ring that twists and locks into a socket, while the rear ring is held by two windage adjustment screws. By loosening one screw and snugging the other, you can shift the rear of the scope left or right for gross windage alignment during bore sighting. That means you get your scope close to center before you ever touch the internal turrets, keeping all that precious adjustment range reserved for fine sight-in.
Steel standard bases and rings are among the most versatile mounting setups Leupold offers, and they shine on standard-caliber hunting rifles. The front dovetail pivots as you adjust the rear windage screws, which is a real help if your receiver doesn't line up perfectly with the bore. You can also shim the base for gross elevation changes, freeing up your elevation turret for bullet drop compensation if that's your style of shooting.
Keep in mind this is the base only. It's designed to pair with Leupold STD rings, which come in several heights to match your scope's objective diameter and clear the barrel. Match your STD rings to your scope's maintube size, typically 1 inch or 30mm, and you'll have a tough, repeatable mount that holds zero shot after shot. The STD setup is best suited to standard calibers and is backed by Leupold's lifetime guarantee.
This base is built for right-hand, short-action Savage 10 through 16 rifles that have a round receiver with the Accutrigger setup. Make sure your receiver is round rather than flat, since Leupold makes a separate flat-receiver version. Confirming your exact model before ordering saves you a headache at the bench.
No, this listing is for the one-piece base only. It's designed to pair with Leupold STD rings, which are sold separately and come in several heights. Match your ring height to your scope's objective size and your maintube diameter, usually 1 inch or 30mm, for proper clearance over the barrel.
The front of the base uses a dovetail socket while the rear ring is held by two windage adjustment screws. By loosening one side and tightening the other, you shift the rear of the scope left or right for coarse windage during bore sighting. This keeps your scope close to center so you can reserve the internal turret travel for precise sight-in.
The silver finish is meant to blend in with stainless or silver barreled actions, so it looks right at home on an all-weather Savage. If you run a matte black or blued rifle, Leupold offers this same base in matte and gloss finishes to suit your setup.
| UPC | 030317557263 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 55726 |
| Color | Silver |
| Style | Rotary Dovetail Style Bases |
You must be logged in to post a review.
Reviews
There are no reviews yet.