Description
The Leupold BackCountry ringmount for the Remington 700 does away with the usual base-and-ring juggling act. It's a two-piece integrated design that marries the ring and base into a single machined unit, so you get fewer parts, less flex, and a cleaner install on your rifle. This is the 1" high version, with a ring height of 1.1 inches that clears most hunting scopes carrying 50mm objectives.
Why the BackCountry Remington 700 Mount Earns Its Spot
Leupold cut these from 7075-T6 aircraft-grade aluminum, which is the same alloy you'll find in demanding aerospace work. The result is one of the lightest and toughest hunting-style mounts Leupold makes, tipping the scale at roughly 3.4 ounces for the pair. When you're counting every ounce on a backcountry pack-in, that matters, and the rugged build means it won't give up zero when the rifle gets knocked around in the truck, the blind, or on the trail.
Built Specifically for the Remington 700
This isn't a universal clamp-on setup. The BackCountry mount is machined to fit the Remington 700 receiver directly, giving you that custom, rock-solid pairing between rifle and optic. One standout on part number 187349 is the adaptable screw design, which accepts both 6-48 and 8-40 receiver screws. If you've drilled and tapped your 700 for the beefier 8-40 hardware, this mount is ready for it, and it works with standard 6-48 screws too.
Install Notes and Fit
Mounting is straightforward. Leupold spec's the base and receiver screws at 22 in-lbs and the ring top screws at 28 in-lbs, so a quality torque wrench will get you dialed in right the first time. The matte black finish keeps glare down in the field and ties in nicely with a traditional-styled hunting rifle. For folks who run Leupold glass or any 1" tube scope on a 700, it's a trusted, no-nonsense choice that's made in the USA.
Key Specifications
- Manufacturer: Leupold
- Manufacturer Part Number: 187349
- UPC: 030317051310
- Model: BackCountry Remington 700
- Fits: Remington 700
- Ring Diameter: 1 inch
- Ring Height Style: High
- Ring Height: 1.1 in
- Configuration: Two-piece integrated ringmount
- Material: 7075-T6 aircraft-grade aluminum
- Screw Compatibility: 6-48 and 8-40 receiver screws
- Base Cant: None
- Weight: 3.4 oz
- Finish: Matte Black
- Base/Receiver Screw Torque: 22 in-lbs
- Ring Top Screw Torque: 28 in-lbs
What’s Included
- Two-piece BackCountry integrated ringmount set (front and rear)
- Mounting screws
- Instruction sheet
Frequently Asked Questions
What rifle does the Leupold BackCountry 1" High ringmount fit?
This mount is machined specifically for the Remington 700 receiver. It attaches directly to the rifle with no separate base needed, giving you a tight, custom fit between your 700 and your optic.
Does this mount work with 8-40 receiver screws?
Yes. Part number 187349 uses Leupold's adaptable screw design that accepts both standard 6-48 and the larger 8-40 receiver screws. If your 700 is drilled and tapped for 8-40 hardware, this mount is ready for it.
What size scope tube and objective does the BackCountry high ringmount support?
These rings are built for scopes with a 1-inch main tube. The high ring height of 1.1 inches is designed to clear larger objective bells, typically up to around 50mm, depending on your specific scope and barrel contour.
How much does the Leupold BackCountry Remington 700 mount weigh?
The pair weighs in at roughly 3.4 ounces. Leupold builds them from 7075-T6 aircraft-grade aluminum, which keeps the weight down while staying tough enough for hard backcountry use.





Reviews
There are no reviews yet.