$61.99
62 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A scope is only as steady as the rings holding it, and these Leupold Ringmounts give your 1-inch tube the kind of foundation that holds zero shot after shot. Cut from solid steel rather than aluminum, they're built to shrug off recoil and rough handling without flinching. This set is specifically shaped to fit the Ruger No. 1 and 77/22, dropping onto the 11mm, 13mm, or 3/8" dovetail without any drilling or tapping required.
The big draw here is the material. Steel ringmounts bring tighter tolerances and better integrity than cast or aluminum alternatives, which matters a lot on a hard-kicking single-shot like the No. 1. This is the high-height version, standing right around 1.15 inches, which gives you clearance for bigger objective bells and helps larger scopes clear the quarter rib found on most No. 1 variants. The matte black finish keeps glare down in the field and blends in nicely with a blued rifle.
One thing worth knowing about the No. 1: it uses a one-piece style ring that indexes into the receiver's integral bases, and the rings sit the same height front and rear. The No. 1's rear mounting point sits a touch forward compared to a bolt gun, so shorter modern scopes sometimes need extended rings to get full eye relief. For a standard-length 1-inch scope with up to a 40mm objective, this high set is usually the sweet spot for clearing the barrel and rib. Take your time leveling the reticle and setting eye relief before you torque things down.
Backed by Leupold's Full Lifetime Guarantee, this is a buy-it-once mounting solution. If you're running a 1-inch scope on a No. 1 or 77/22 and want steel instead of a factory substitute, this high matte set gets the job done right.
Yes, this set is purpose-built for the Ruger No. 1 and 77/22 and indexes into the rifle's integral dovetail bases. It works as a no-tap mounting method on an 11mm, 13mm, or 3/8" dovetail, so there's no drilling or tapping involved. Just make sure you're pairing them with a 1-inch main tube scope.
These are 1-inch rings, so they fit any scope with a 1-inch main tube. If your scope has a 30mm tube, you'll need a different set. Double-check your scope's tube diameter before ordering, since 1-inch and 30mm are the two most common sizes.
The high version stands around 1.15 inches, which generally clears the barrel and the quarter rib on most No. 1 models with a 1-inch scope up to about a 40mm objective. Larger objective bells or heavily contoured barrels may call for a taller ring. It's always smart to mock up the scope before final torque to confirm clearance.
Being machined from solid steel, they offer superior integrity and tighter tolerances than many factory or aluminum substitutes, which is a real benefit on a hard-recoiling single-shot like the No. 1. The matte finish keeps glare in check, and they're covered by Leupold's Full Lifetime Guarantee. For a rig you plan to zero once and trust all season, they're a solid upgrade.
| UPC | 030317502171 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 50217 |
| Mount Type | 3/8"/11mm/13mm Dovetail |
| Product Type | Ring Set |
| Shipping Weight | 0.35 |
| Style | 2 Piece |
You must be logged in to post a review.
Reviews
There are no reviews yet.