Description
Leupold's Mark 4 rings are the mounting system a lot of serious rifle builders reach for when they want the scope to stay put and the zero to hold. This two-piece set accepts a 1-inch main tube and clamps onto any Picatinny-style rail using the cross-slot design that put the Mark 4 line on the map. Machined from aircraft-grade aluminum and finished in matte black, they strike a smart balance between strength and keeping weight off your rifle, which anyone who hauls a gun into the field will appreciate.
Why the Mark 4 Cross-Slot Design Earns Its Keep
The cross-slot setup and tight machining tolerances are what give these rings their reputation. The recoil lugs seat into the rail slots and the large keeper nuts clamp everything down hard, so the optic isn't going to walk under recoil. Folks who mount a lot of scopes consistently point out that the Mark 4 rings line up clean with no need for lapping, which takes a chore off the install. The medium height gives a 0.84-inch optical centerline, a sweet spot that clears most standard objective bells on bolt guns and AR platforms alike.
Screw Options Built Into the Mark 4 Rings
Leupold includes both the standard 6-48 shoulder screws and the beefier 8-40 screws with these rings. The 8-40 hardware gives you extra clamping strength for hard-kicking calibers where the smaller screws might not cut it, and having both in the box means you're covered no matter what your rail is drilled for. Ring top screws generally get torqued around 28 inch-pounds, so a torque driver is worth having on hand for a proper install.
Field-Proven on Everything From Hunting Rifles to Precision Builds
These rings have seen service on tactical, competition, and hunting rifles, and the Mark 4 system is trusted for some genuinely stout recoil. Whether you're setting up a deer rifle, dialing in a long-range build, or finishing out an AR, this set gives you a dependable, repeatable connection between your optic and your rail. They're backed by Leupold's lifetime guarantee, which tells you plenty about how they're built.
Key Specifications
- Manufacturer: Leupold
- Model: Mark 4
- MPN: 57524
- UPC: 030317575243
- Tube Diameter: 1 inch
- Ring Height: Medium (0.84" optical centerline)
- Material: Aircraft-Grade Aluminum
- Finish: Matte Black
- Color: Black
- Mount Type: Picatinny Rail
- Design: Cross-Slot / Slot and Spline
- Configuration: 2-Piece Ring Set
- Screws Included: 6-48 and 8-40
- Weight: 3.6 oz
What’s Included
- Two-piece Leupold Mark 4 1-inch medium scope ring set
- 6-48 shoulder screws
- 8-40 screws
- Keeper nuts
Frequently Asked Questions
Will these Mark 4 rings fit my Picatinny rail?
Yes. These rings use Leupold's cross-slot design to clamp onto any Picatinny-style rail, including Leupold PRW bases. The recoil lugs seat into the rail slots and the keeper nuts lock everything down for a secure, repeatable mount.
What size scope tube do the 57524 rings hold?
These are built for optics with a 1-inch main tube. If your scope has a 30mm or 34mm tube, you'll want a different size in the Mark 4 lineup, since these only accept 1-inch tubes.
Why do the Mark 4 rings come with two different screw sizes?
Leupold includes both standard 6-48 shoulder screws and larger 8-40 screws. The 8-40 hardware offers more clamping strength for heavy-recoiling calibers, and having both in the box means you're set no matter how your rail or base is drilled.
Do these medium rings need to be lapped before mounting a scope?
In most cases, no. The Mark 4 rings are machined to tight tolerances and tend to align cleanly right out of the box, which is a big reason gunsmiths and regular rifle owners like them. Just torque the ring top screws to around 28 inch-pounds for a proper install.



Reviews
There are no reviews yet.