$68.99
30 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Leupold BackCountry ringmount takes a different approach than your typical two-part base-and-ring setup. Instead of stacking a separate base under a separate ring, each piece is machined as a single unit of 7075-T6 aircraft-grade aluminum that bolts directly to the receiver of your Winchester XPR. Fewer connection points means fewer places for things to shift under recoil, which is exactly what you want when a rifle gets banged around on a backcountry hunt. These are the 1-inch medium height models in a low-glare matte black finish.
By milling the base and ring from the same block, Leupold cuts weight while keeping the structure tight. That matters when you are counting ounces on a mountain rifle but still need a mount that holds zero shot after shot. The medium ring height clears most standard objective bells on a 1-inch tube, and for reference these BackCountry mediums sit roughly in the neighborhood of a Talley Lightweight low, so they keep the scope tucked down close to the bore for a natural cheek weld.
Installation is refreshingly simple since there is no separate base to index. The front and rear ringmounts can be reversed to dial in proper ring spacing, and the Torx receiver screws torque to 28 in-lbs. When you set the scope, shoulder the rifle in your natural shooting position and slide the optic until you get a full sight picture, then snug the ring tops down evenly. It is the kind of job you can knock out at the bench in an afternoon with a good Torx driver and a torque wrench.
This set is cut specifically for the Winchester XPR footprint, so it will not fit a Model 70 or other actions. If you run an XPR and want a clean, lightweight, no-nonsense mounting solution that pairs beautifully with Leupold glass, this ringmount set earns its place. Backed by Leupold's lifetime guarantee and made in the USA.
No, this particular set is machined specifically for the Winchester XPR receiver footprint. It will not fit a Winchester Model 70 or other actions. Leupold makes BackCountry ringmounts cut for other popular rifles, so check for the model that matches your specific rifle.
These are built for a 1-inch main tube, which covers a huge chunk of hunting scopes on the market. If your optic has a 30mm tube, you will need the 30mm version instead. Double-check your scope's tube diameter before ordering.
Medium height works well for most standard objective bells on a 1-inch tube and keeps the scope down low for a comfortable cheek weld. For reference, these BackCountry mediums run roughly comparable to a Talley Lightweight low. If you are running a larger objective lens, you may want to confirm clearance over the barrel first.
The ringmounts bolt directly to the receiver, so there is no separate base to index first. Tighten the receiver screws to 22 in-lbs and the ring top screws to 28 in-lbs using a Torx driver. The front and rear mounts can be reversed to help you get proper ring spacing for your scope.
| UPC | 030317022198 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 177142 |
| Model | |
| Shipping Weight | 0.275 |
| Style | Mount |
You must be logged in to post a review.
Reviews
There are no reviews yet.