Description
The Leupold BackCountry is a two-piece ringmount built for one job and built to do it well: getting a 1-inch scope mounted rock-solid to a Savage 10/110 round receiver. Instead of running a separate base and ring setup, each piece combines an integrated base and ring into a single machined unit. That means fewer parts to fuss with, fewer places for things to shift, and a cleaner, lower profile on top of the rifle. It's made right here in the USA and carries Leupold's reputation for mounts that just hold.
Why the BackCountry Ringmount Earns Its Spot
These are cut from 7075-T6 aircraft-grade aluminum, which is the same stuff Leupold leans on for its lightest and most rugged mounting solutions. The whole set tips the scale at right around 3.2 ounces, so you get serious strength without piling ounces onto a backcountry rig where every bit of weight matters. The matte black finish keeps glare down in the field and shrugs off the knocks that come with real hunting.
Built Around the Savage 10/110 Round Receiver
This is a rifle-specific mount, machined to fit the Savage 10/110 round receiver directly. The medium height sits at roughly .97 inches, which clears most standard objective bells on a 1-inch tube while still keeping your cheek weld comfortable and your head low on the stock. If you want your scope tucked in close for faster target acquisition and better recoil management, medium is usually the sweet spot for this platform.
Hardware That Covers Your Bases
Leupold ships these with both 8-40 and 6-48 screws, so you've got the flexibility to work with whatever screw pattern your receiver is set up for. The package also includes a Torx wrench, so you can get to work the day it shows up without hunting through your tool drawer. For a dependable, no-drama scope mount on a Savage bolt gun, the BackCountry is a smart pick.
Key Specifications
- Manufacturer: Leupold
- Manufacturer Part Number: 187352
- UPC: 030317051419
- Model: BackCountry
- Fit: Savage 10/110 Round Receiver
- Configuration: 2-Piece Ringmount
- Ring Diameter: 1 inch
- Ring Height Style: Medium
- Ring Height: .97 in
- Material: 7075-T6 Aircraft-Grade Aluminum
- Finish: Matte Black
- Weight: 3.2 oz
- Base Cant: None
- Base/Receiver Screw Torque: 22 in-lbs
- Ring Top Screw Torque: 28 in-lbs
- Made In: USA
What’s Included
- Two-piece ring/base combo (one pair)
- 16 screws (8-40 and 6-48)
- Torx wrench
Frequently Asked Questions
What rifle do the BackCountry rings fit?
These are machined specifically for the Savage 10/110 round receiver. The base and ring are integrated into each piece and bolt directly to the receiver, so there's no separate base needed. They are not designed for flat-back Savage receivers or other actions.
What size scope tube do these rings hold?
The BackCountry rings are built for a 1-inch scope maintube. If your scope has a 30mm tube, you'll want the 30mm version of this mount instead. Double-check your scope's tube diameter before ordering.
Will medium height clear my objective bell?
Medium height sits at about .97 inches and clears most standard objective bells on a 1-inch scope while keeping your head low on the stock. If you're running a larger objective, you may want the high version for extra clearance. For most typical hunting scopes, medium is the go-to height.
What screws and tools come with the BackCountry rings?
The set includes both 8-40 and 6-48 screws so you can match your receiver's screw pattern, plus a Torx wrench to get everything torqued down. Leupold lists a base screw torque of 22 in-lbs and ring top screw torque of 28 in-lbs. A torque wrench is recommended for consistent, repeatable results.




Reviews
There are no reviews yet.