Description
Mounting a big-tube scope on an AR has always come with two headaches: getting the optic high enough for a comfortable head position, and getting it far enough forward for proper eye relief. The Leupold Mark IMS 35mm tackles both at once. It's a one-piece integral mounting system that combines the base and rings into a single chunk of aluminum, so there's nothing to stack, shim, or second-guess once it's torqued down.
What Sets the Mark IMS 35mm Apart
This is a forward cantilever design, which means the rings sit out ahead of the clamp. That setup pushes your scope forward on the rail so you can run a standard-eye-relief optic without needing a special short-relief scope or a pile of risers. It drops onto any MIL-spec 1913/Picatinny rail and clamps down using nuts, giving you a rock-solid lockup that holds zero through recoil. The rings themselves are built for a 35mm maintube, which fits a lot of the larger first-focal-plane tactical scopes out there.
Dialing In Height and Eye Relief
The Mark IMS places the center of your optic 1.5 inches above the rail, which matches the height of classic AR open sights. That's not an accident. It lets you get behind the scope naturally without mashing your face into the stock to find the reticle, and it leaves room to clear backup iron sights on a lot of builds. At 5.74 inches long with about 3.68 inches of real estate between the rings, it gives large scopes plenty of contact area for a secure grip.
Built to Leupold Standards
Machined from aluminum and finished in a matte Flat Dark Earth, this mount keeps weight down to roughly 5.9 ounces while staying rigid where it counts. It's part of Leupold's tactical Mark lineup and carries the brand's reputation for gear that gets treated rough and keeps running. If you're setting up a precision AR or a larger-caliber rig with a 35mm scope, this is a clean, no-nonsense way to get there.
Key Specifications
- Manufacturer: Leupold
- Model: Mark IMS (Integral Mounting System)
- Manufacturer Part Number: 178847
- UPC: 030317025090
- Color/Finish: Flat Dark Earth, Matte
- Material: Aluminum
- Base Configuration: 1 Piece Cantilever
- Mount Type: Picatinny / MIL-spec 1913 Rail
- Ring Diameter: 35 mm
- Ring Height: 1.5 in
- Base Cant: None (0 MOA)
- Overall Length: 5.74 in
- Length Within Rings: 3.68 in
- Rear Offset: 0.38 in
- Ring Depth: 0.65 in
- Weight: 5.9 oz
What’s Included
- Leupold Mark IMS 35mm one-piece integral mount (Dark Earth)
- Ring cap screws (Torx)
- Clamping nuts
- Mounting instructions
Frequently Asked Questions
What size scope does the Leupold Mark IMS 35mm fit?
This mount is built specifically for riflescopes with a 35mm maintube. The integral rings are machined to that diameter, so it won't fit 30mm or 34mm tubes without the correct model. If your scope has a 35mm tube, this is the right match.
Will the Mark IMS 35mm work on my AR-style rifle?
Yes. It's designed to clamp onto any MIL-spec 1913/Picatinny rail, which covers most AR-15 and AR-10 flattop uppers. The cantilever design pushes the scope forward so you get proper eye relief without a specialty optic.
How high does the Leupold Mark IMS 35mm position the scope?
It places the center of the optic 1.5 inches above the top of the rail. That matches the sight height of classic AR open sights, so you get a natural head position and a comfortable cheek weld. On many builds it also leaves room to clear backup iron sights.
Is the Mark IMS a one-piece mount or separate rings and base?
It's a one-piece integral unit, with the base and rings machined from a single block of aluminum. That design removes the guesswork of aligning separate rings and gives you a rigid, repeatable platform that holds zero through recoil.




Reviews
There are no reviews yet.