Description
Lehigh Defense built the Xtreme Defense line around a simple idea: a defensive bullet that performs the same whether it meets bare gel, heavy clothing, or a sheet of drywall first. These .452 diameter, 220 grain projectiles are machined from solid copper with the Fluid Transfer Monolithic nose geometry that gives the FTM family its name. There's no lead core and no jacket to separate, just one consistent piece of copper that flies true and holds its shape through tough mediums.
The standout here is the fluted nose. As the bullet pushes through fluid, those radial flutes force hydraulic energy inward, then release it outward in high pressure spikes that tear up surrounding tissue. The practical result is a permanent wound cavity that runs well beyond what a flat or round nose creates, often rivaling or beating a good expanding hollow point, while the bullet itself keeps driving straight instead of mushrooming and stalling.
Why Reloaders Reach for the Xtreme Defense FTM
At 220 grains in .452, this projectile is a natural fit for big bore revolver loads like .454 Casull, .45 Colt, and .460 S&W Magnum. The listed ballistic coefficient is 0.17 with a sectional density of .154 and an overall length of .845 inches, so you have the numbers you need to work up a load with confidence. Because it's a monolithic copper design, you'll typically treat it a little differently than a lead bullet when setting up your dies and working toward a safe charge.
Building a Defensive Round You Can Trust
For handloaders who want controlled, repeatable barrier performance in a heavy bullet, the Xtreme Defense FTM is one of the more interesting components on the shelf. It rewards careful load development with deep, straight penetration and that signature wide wound channel. If you run a large frame revolver and like rolling your own defensive and hunting rounds, these are worth a spot on your bench.
Key Specifications
- Manufacturer: Lehigh Defense
- Model: Xtreme Defense
- Manufacturer Part Number: 09452220SP
- UPC: 810025507794
- Bullet Type: Fluid Transfer Monolithic (FTM)
- Bullet Diameter: .452
- Caliber: .45 Caliber (.454 Casull / .45 Colt / .460 S&W Mag)
- Weight: 220 Grain
- Jacket Material: Copper
- Core Material: Solid Copper
- Ballistic Coefficient: 0.17
- Sectional Density: .154
- Overall Length: .845 in
- Quantity: 50 Per Box
What’s Included
- 50 Lehigh Defense Xtreme Defense .452 220gr Fluid Transfer Monolithic (FTM) projectiles
Frequently Asked Questions
What calibers are these Lehigh Defense Xtreme Defense bullets meant for?
These .452 diameter 220 grain projectiles are designed for big bore revolver cartridges including .454 Casull, .45 Colt, and .460 S&W Magnum. They're a reloading component, not loaded ammunition, so you'll be seating them into your own brass. Always use published load data that matches your specific cartridge and bullet type.
Are these Xtreme Defense FTM bullets lead free?
Yes. The Xtreme Defense FTM is machined from solid copper with no lead core and no jacket to separate on impact. That one piece construction is what lets it hold its shape and drive straight through barriers.
How is the Fluid Transfer Monolithic design different from a hollow point?
Instead of expanding, the FTM uses a fluted nose that channels hydraulic energy inward and then forces it back outward, creating pressure spikes that damage tissue well beyond the bullet's path. This produces a wide permanent wound cavity while the projectile keeps penetrating deep and straight. It also means barriers like heavy clothing or drywall don't clog or close up the bullet the way they can affect a hollow point.
How many bullets come in a box?
Each box contains 50 projectiles. These are bullets only for reloading and do not include brass, powder, or primers.



Reviews
There are no reviews yet.