Description
The Lehigh Defense Xtreme Defense 115gr is a solid copper, lead-free projectile sized at .400 diameter, making it a match for both .40 S&W and 10mm Auto handloads. Instead of relying on expansion like a hollow point, this bullet uses a machined nose with radial flutes to do the work. As it drives through a target, those flutes force fluid inward and then release it outward at high pressure, creating cavitation and a permanent wound cavity that runs larger than what you'd expect from a bullet this weight.
At 115 grains it's lighter than the typical .40 caliber projectile, which lets you push it to higher velocities. The design carries a G1 ballistic coefficient of .121 and a sectional density of .103. Because it's milled from a single piece of copper rather than a lead core with a jacket, it holds its shape through barriers like drywall and heavy clothing without deforming or changing trajectory, something that often trips up conventional hollow points.
Why Handloaders Reach for the Xtreme Defense 115gr
The appeal here is consistency. You get the same machined geometry on every bullet, so once you've worked up a load, your results stay repeatable from one batch to the next. The monolithic copper build also means there's no lead fouling to deal with, and it's a solid pick if you shoot indoor ranges or hunt in areas where lead-free is the way to go. Lehigh Defense, now part of the Wilson Combat family, machines these in the USA.
Loading the .40 Cal Xtreme Defense FTM
Since these are a non-expanding, machined projectile, seating depth and overall length matter. The published bullet length runs around .580 to .615 inches depending on the spec sheet, so check your load data and confirm your OAL against your specific pistol's chamber. These feed well thanks to the pointed nose profile, and the flat base makes seating straightforward. Work your charges up carefully, as copper behaves a little differently than lead-core bullets of the same weight.
Key Specifications
- Manufacturer: Lehigh Defense
- Manufacturer Part Number: 09400115SPFC
- UPC: 810025507725
- Bullet Technology: Xtreme Defense Fluid Transfer Monolithic (FTM)
- Caliber/Gauge: .40 S&W / 10mm Auto
- Bullet Diameter: .400
- Bullet Weight: 115 Grain
- Core Material: Solid Copper
- Lead Free: Yes
- Ballistic Coefficient (G1): 0.121
- Sectional Density: 0.103
- Quantity: 100 Bullets
- Country of Origin: USA
What’s Included
- 100 Lehigh Defense Xtreme Defense 115gr .400 diameter copper bullets
Frequently Asked Questions
What calibers can I load the Xtreme Defense 115gr bullet in?
This projectile is a .400 diameter bullet, which makes it suitable for both .40 S&W and 10mm Auto handloads. Because the two cartridges share bullet diameter, you can use the same component across both as long as you follow the correct load data for each. Always confirm your overall length works in your specific pistol's chamber.
How does the Xtreme Defense bullet work if it doesn't expand?
Rather than mushrooming like a hollow point, the Xtreme Defense uses radial flutes machined into the nose to channel fluid inward and then force it outward under pressure. That action creates cavitation and a permanent wound cavity that can run larger than many expanding bullets. The solid copper body stays intact, so it penetrates straight even after passing through barriers.
Are these Lehigh Defense bullets lead free?
Yes. The Xtreme Defense 115gr is machined from solid copper with no lead core, so it's fully lead free. That makes it a good option for indoor ranges and anyone looking to avoid lead exposure or lead fouling in the bore.
Do I need a special twist rate or extra prep to load these?
No special twist rate is required beyond what your .40 or 10mm barrel already has. Since it's a machined copper projectile, pay attention to seating depth and overall length, and work your powder charges up carefully, as copper bullets can behave differently than lead-core bullets of the same weight. Check published Lehigh Defense load data before loading.





Reviews
There are no reviews yet.