0
0

Lehigh Defense Xtreme Penetrator 250gr .452 FTM Bullets 50/Box

UPC: 810025507695

$94.00

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lehigh Defense Xtreme Penetrator in .452 diameter is a 250 grain, solid-copper projectile machined for reloaders who build big-bore revolver and hunting loads. It carries the Fluid Transfer Monolithic design, where radial flutes on the nose force hydraulic energy inward on impact, then release it to create a permanent wound cavity that runs larger than most expanding bullets. Because it's one piece of copper with no lead core and no jacket to separate, it holds together through barriers and keeps tracking straight. This is a lead-free design with a ballistic coefficient of 0.206 and a sectional density of 0.175.

What Makes the Xtreme Penetrator Work

The magic is in that fluted nose. Instead of mushrooming like a hollow point, the geometry pushes fluid outward with enough force to cut a wide channel while the bullet itself stays intact and drives deep. That's why hunters reach for the Xtreme Penetrator on large, tough, and sometimes dangerous game, and why it earns a reputation for punching through drywall, denim, wood, and even steel in gel testing. The .452 diameter measures 0.840 inches long with a 0.279 inch ogive, and it's rated for impact velocities from 750 fps up to 5000 fps muzzle velocity.

Loading the 250gr .452 FTM Bullets

This diameter is the sweet spot for .45 Colt, .454 Casull, and .460 S&W Magnum, and plenty of folks run it in .450 Bushmaster too. A couple of tips from reloaders who've spent time with these: use a flat-face seating stem so the plug engages the bullet face instead of the fluted edges, which keeps your seating depth consistent. Monolithic copper is harder than lead or jacketed bullets, so a roll crimp is the right call and many prefer a combined seat-and-crimp step over a separate crimp die. Lehigh publishes a free online load data library covering this bullet across its listed calibers, so start low and work up as you would with any copper projectile.

Each box holds 50 bullets. These are projectiles only for reloading, not loaded ammunition.

Key Specifications

  • Manufacturer: Lehigh Defense
  • Manufacturer Part Number: 07452250SP
  • UPC: 810025507695
  • Bullet Technology: Xtreme Penetrator (Fluid Transfer Monolithic)
  • Bullet Diameter: .452
  • Bullet Weight: 250 Grain
  • Bullet Length: 0.840 in
  • Ogive Length: 0.279 in
  • Construction: Solid Copper, Lead-Free
  • Ballistic Coefficient (G1): 0.206
  • Sectional Density: 0.175
  • Minimum Impact Velocity: 750 fps
  • Maximum Muzzle Velocity: 5000 fps
  • Recommended Calibers: .45 Colt, .454 Casull, .460 S&W Magnum
  • Firearm Type: Handgun
  • Quantity: 50 Per Box

What’s Included

  • 50 Lehigh Defense Xtreme Penetrator 250gr .452 solid-copper bullets (projectiles only, not loaded ammunition)

Frequently Asked Questions

What calibers are the .452 250gr Xtreme Penetrator bullets made for?

This .452 diameter 250 grain bullet is built for big-bore revolver cartridges, with Lehigh listing it as optimal for .45 Colt, .454 Casull, and .460 S&W Magnum. A lot of reloaders also run it in .450 Bushmaster. Lehigh offers a free online load data library so you can match it to your cartridge and powder.

Are these loaded rounds or just bullets?

These are projectiles only, meant for handloading. The box contains 50 bullets and no cases, primers, or powder, so you'll need your own components to build finished cartridges.

Any tips for seating and crimping the Xtreme Penetrator?

Since it's solid copper with a fluted nose, a flat-face seating stem works best because it engages the bullet face instead of the flute edges, giving you consistent seating depth. A roll crimp is the right choice for a monolithic bullet, and many reloaders prefer a combined seat-and-crimp approach over a separate crimp die. Start at a low charge and work up as you would with any copper projectile.

How does the Xtreme Penetrator perform compared to a hollow point?

Instead of expanding, the fluted nose forces hydraulic energy outward to cut a permanent wound cavity that runs wider than most expanding bullets, all while the solid copper body stays intact and drives deep and straight. That barrier-defeating, deep-penetrating behavior is why it's a popular pick for large and tough game. It won't clog or fail the way a hollow point can after passing through denim or drywall.

Additional information

UPC

810025507695

Manufacturer

Manufacturer Part Number

07452250SP

Caliber/Gauge

452 Caliber

Grains

250

Quantity

50

Reviews

There are no reviews yet.

Be the first to review “Lehigh Defense Xtreme Penetrator 250gr .452 FTM Bullets 50/Box”