Description
The Lehigh Defense .308 150gr Match Solid is a lead-free, CNC-turned projectile aimed at handloaders who want every bullet in the box to behave the same way. Instead of the multi-stage stamping used for traditional jacketed bullets, Lehigh turns each one from a solid copper bar while it spins at high RPM. That approach produces a projectile whose axis of symmetry lines up with its axis of geometry, which is a fancy way of saying it flies straight and consistently from one shot to the next. With a .308 diameter, 150 grain weight, and a 1.321 inch overall length, it drops right into your standard 30 caliber load workup.
What Makes the Match Solid Different
The big draw here is uniformity. Because these are machined rather than stamped, you avoid the off-center cores and internal voids that can sneak into conventional bullets. That translates to a G1 ballistic coefficient of 0.513 and a sectional density of .226, numbers that hold up well for a 150 grain pill. It runs supersonic and carries a minimum impact velocity of 1,500 fps, so it is built for target and match work rather than terminal expansion.
Loading the .308 150gr Match Solid
This bullet is a good match for .308 Winchester, .30-06 Springfield, and .300 Winchester Magnum builds. Keep in mind copper solids are longer than lead-core bullets of the same weight, so pay attention to your seating depth and give yourself room to work up a load. Lehigh calls for a minimum twist rate of 1:12, which most modern 30 caliber barrels will handle without trouble.
If you shoot competition or just chase small groups off the bench, the appeal is in the consistency. Lehigh positions these for record-setting accuracy, and the machined construction is the reason handloaders keep reaching for them when they want to take rifle and reloading variables off the table.
Key Specifications
- Manufacturer: Lehigh Defense
- Manufacturer Part Number: 04308150SP
- UPC: 810025507350
- Caliber: .30 Caliber
- Bullet Diameter: .308"
- Bullet Weight: 150 grain
- Bullet Type: Match Solid
- Core/Material: Solid Copper (Lead Free)
- Bullet Length: 1.321"
- Ballistic Coefficient (G1): 0.513
- Ballistic Coefficient (G7): 0.263
- Sectional Density: 0.226
- Minimum Twist Rate: 1:12
- Velocity Rating: Supersonic
- Minimum Impact Velocity: 1,500 fps
- Quantity: 50 per box
What’s Included
- 50 Lehigh Defense .308 150gr Match Solid projectiles (bullets only, not loaded ammunition)
Frequently Asked Questions
Are the Lehigh Defense .308 Match Solid bullets loaded ammunition?
No. These are projectiles only, meant for reloading your own brass. You will supply your own cases, primers, and powder to assemble finished cartridges. This is not ready-to-fire ammunition.
What cartridges can I load the .308 150gr Match Solid in?
The .308 diameter and 150 grain weight make it a solid fit for .308 Winchester, .30-06 Springfield, and .300 Winchester Magnum. Since it is a copper solid, it tends to run longer than a lead-core bullet of the same weight, so work up your seating depth and charge carefully.
What twist rate do I need to stabilize these bullets?
Lehigh lists a minimum twist rate of 1:12 for the .308 150gr Match Solid. Most modern 30 caliber rifle barrels meet or exceed that, so stabilization should not be an issue in a typical .308 or .30-06.
What makes the Match Solid design more accurate than a standard bullet?
Each bullet is CNC-turned from a solid copper bar while spinning at high RPM, rather than stamped on multi-stage dies. That eliminates off-center cores and internal voids, so the bullet's axis of symmetry matches its axis of geometry for consistent, repeatable flight.



Reviews
There are no reviews yet.