Description
Lehigh Defense built the Match Solid line for the reloader who sweats the small stuff. Instead of the multi-stage stamping used to make traditional jacketed bullets, these .264 diameter 121 grain projectiles are turned one at a time on CNC machines from a solid, void-free copper bar while spinning at high rpm. The result is a bullet with incredibly tight tolerances and a geometry that stays consistent from the first one in the box to the last.
Why the Match Solid 121 gr Runs So True
The whole idea behind this bullet is getting the axis of symmetry to line up with the axis of geometry. When those two are equal, the bullet flies more predictably, and that shows up on paper downrange. It carries a G1 ballistic coefficient of .538 and a G7 of .276, with a sectional density of .248, so it holds velocity and bucks wind better than a lot of lighter options. Overall length runs 1.420 inches with an ogive length of 0.76 inches, which matters when you're dialing in seating depth.
Loading the .264 121 gr Match Solid
These are projectiles only, not loaded ammunition, so they're meant for your handloads. Lehigh lists this bullet for 6.5mm Creedmoor, .260 Remington, and 6.5x55mm Swedish, and plenty of handloaders have had great results across those chamberings. You'll want a minimum twist rate of 1:8 to stabilize them properly, and they're rated for supersonic use with a maximum muzzle velocity up to 5000 fps and a minimum impact velocity of 1500 fps. Being lead-free copper, they behave a little differently than a cup-and-core bullet, so work your loads up from a starting charge and let your rifle tell you what it likes.
For competition shooters and anyone building precision loads who wants to take variables off the table, the Match Solid is a strong pick. The consistency is the selling point here, and it's the kind of thing you notice when you're trying to shrink groups at distance.
Key Specifications
- Manufacturer: Lehigh Defense
- Manufacturer Part Number (MPN): 04264121SP
- UPC: 810025507343
- Bullet Type: Match Solid (lead-free copper)
- Bullet Diameter: .264
- Bullet Weight: 121 grains
- Caliber: 6.5mm Creedmoor / .260 Remington / 6.5x55mm Swedish
- Ballistic Coefficient (G1): .538
- Ballistic Coefficient (G7): .276
- Sectional Density: .248
- Overall Length: 1.420 in
- Ogive Length: 0.76 in
- Minimum Twist Rate: 1:8
- Velocity Range: Supersonic (up to 5000 fps max)
- Quantity: 50 per box
What’s Included
- 50 Lehigh Defense Match Solid 121 gr .264 bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
Are the Match Solid 121 gr loaded rounds or just bullets?
These are projectiles only, meant for reloading. You'll need your own brass, primers, and powder to build a complete cartridge. They are not ready-to-fire ammunition.
What cartridges will the .264 121 gr Match Solid work in?
Lehigh lists this bullet for 6.5mm Creedmoor, .260 Remington, and 6.5x55mm Swedish. Many handloaders have run them successfully in the .260 Rem as well as the Creedmoor. As with any new component, start low and work your load up carefully.
What twist rate do I need to stabilize these bullets?
Lehigh calls for a minimum twist rate of 1:8 to properly stabilize the 121 grain Match Solid. Most modern 6.5 Creedmoor barrels come in at 1:8 or faster, so you should be in good shape. A faster twist won't hurt, but anything slower may not stabilize them.
What makes the Match Solid different from a regular jacketed bullet?
Instead of being stamped on multi-stage dies like traditional jacketed bullets, each Match Solid is CNC-turned from a solid, inclusion-free copper bar while spinning at high rpm. That process lines up the axis of symmetry with the axis of geometry and holds very tight tolerances. The payoff is consistency bullet to bullet, which is what precision shooters are after.




Reviews
There are no reviews yet.