0
0

Lee Precision Undersized Carbide Sizing Die 40 S&W / 10mm 90787

UPC: 734307907877

$22.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloaders who run 40 S&W or 10mm through semi-autos know the frustration of brass that's been fired in a loose or unsupported chamber. It bulges, loses tension, and sometimes gives you feeding hiccups down the line. Lee's undersized carbide sizing die is built to fix exactly that. It works the case roughly .003" smaller than a standard Lee carbide die, which brings the brass back into spec and restores a snug grip on the bullet. That tighter squeeze is a favorite trick for folks shooting range pickups, older brass with thinner walls, or ammo headed into match-grade or tight chambers.

What the Undersized Carbide Die Does Differently

The magic here is the solid carbide insert. Carbide is hard enough that it sizes brass without any case lubricant, which saves you the whole lube-and-wipe routine that steel dies demand. The insert is ground to a special contour that won't leave a belt mark on the case, and in use the die tends to burnish the brass and clean up its appearance as it works. It threads into any standard single-stage or progressive press with the common 7/8"-14 thread, so it drops right into the setups most handgun reloaders already own.

Why 40 S&W and 10mm Shooters Reach for This Die

Because the 40 S&W runs at healthy pressures and often gets fired through a range of chambers, case bulge near the base is a known headache. This undersized die reaches further down and works that web area tighter than the standard sizer, so your finished rounds chamber cleanly and hold the bullet firmly against setback. It's the same die for both 40 S&W and 10mm since they share case dimensions, and plenty of reloaders also lean on it to tame once-fired brass from unsupported barrels.

Built to Last on the Bench

Lee backs these carbide sizers with a reputation for longevity, and the carbide surface is the reason. Once it's dialed in, you can run hundreds of cases through a loading session without lube and without noticeable wear. Keep in mind the shell holder is sold separately, so grab the right one for your press if you don't already have it set up. The die ships in its own storage box to keep it protected between reloading sessions.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90787
  • Model Number: 90787
  • UPC: 734307907877
  • Caliber: 40 S&W / 10mm Auto
  • Die Type: Undersized Carbide Sizing Die
  • Number of Dies: 1
  • Undersize Amount: Approximately .003" smaller than standard Lee carbide sizing dies
  • Thread Size: 7/8"-14
  • Case Lube Required: No
  • Storage Box Included: Yes
  • Country of Origin: United States
  • Shipping Weight: 0.4813 lbs

What’s Included

  • 1 Lee Precision Undersized Carbide Sizing Die (40 S&W / 10mm)
  • Storage box

Frequently Asked Questions

How is this undersized die different from a standard Lee carbide sizing die?

The undersized version works your brass about .003" smaller than Lee's standard carbide sizing die. That extra squeeze restores case tension and helps rounds chamber in tighter or match chambers. It's the go-to choice when you want maximum feeding reliability or you're reloading brass that's been fired in loose or unsupported barrels.

Do I need case lube with the carbide sizing die?

No, the solid carbide insert lets you size brass without any case lubricant, which is one of the big perks of a carbide die. Some reloaders still add a light touch of lube to make the press stroke smoother on a long session, but it isn't required. Skipping lube also means no messy wipe-down step afterward.

Does this die fit both 40 S&W and 10mm brass?

Yes, the 40 S&W and 10mm Auto share the same case diameter, so this single die handles both. It threads in with the standard 7/8"-14 thread and fits common single-stage and progressive presses. Just set your die height for the case you're running and you're good to go.

Is a shell holder included with the die?

No, the shell holder is sold separately. You'll want the correct shell holder for 40 S&W / 10mm to run cases through your press. If you're adding this to an existing setup, you may already have the right one on hand.

Additional information

UPC

734307907877

Manufacturer

Manufacturer Part Number

90787

Shipping Weight

0.4813

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Undersized Carbide Sizing Die 40 S&W / 10mm 90787”