0
0

Lee 6-Cavity Bullet Mold 356-120-TC .356 120gr 9mm Luger

UPC: 734307903879

$48.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 6-Cavity Bullet Mold produces a .356 diameter, 120-grain truncated cone bullet that feeds a whole family of popular cartridges, including 9mm Luger, 38 Super Auto, and 380 ACP. If you shoot any of those in volume, casting your own is one of the best ways to keep the press fed, and six cavities per pour means you fill the bullet box a lot faster than you would with a double cavity block.

Why Casters Reach for the Lee 6-Cavity Mold

Lee machines these blocks from aluminum, which carries a few real advantages at the melting pot. The aluminum won't rust the way cast iron can, and it heats up and cools down quicker than iron or steel, so you'll start dropping good bullets after just a few casts instead of babying it for ten minutes. Aluminum also weighs about a third of what iron blocks do, which your hands will thank you for during a long casting session. The blocks are CNC machined and lathe bored with steel bushings and alignment pins to keep every cavity true.

Getting the Most From This 356-120-TC Mold

The mold comes with a cam-operated, hard-anodized sprue plate held under tension by tempered spring washers at each end, which gives you a clean, consistent cut on the sprue. The truncated cone profile feeds reliably in autoloaders and gives you a nice flat meplat for cleaner holes on paper. Handles are not included with this mold, so you'll want to grab a set of Lee commercial mold handles (part 90005) to run it. A bullet sizing kit and lube are also handy additions if you're setting up a full casting bench.

This is a proven choice for anyone loading cheap, accurate plinking and practice ammo for the 9mm and its cousins. Pair it with a good lead alloy, keep your pot temperature steady, and this block will turn out buckets of usable bullets for years.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90387
  • UPC: 734307903879
  • Bullet Diameter: .356 inch
  • Bullet Weight: 120 Grain
  • Bullet Style: Truncated Cone
  • Cavities: 6
  • Compatible Cartridges: 9mm Luger, 38 Super Auto, 380 ACP
  • Block Material: Machined Aluminum
  • Sprue Plate: Hard Anodized, Cam Operated
  • Handles Included: No (Lee part 90005 sold separately)
  • Gas Check: No
  • Country of Origin: United States

What’s Included

  • Lee 6-Cavity Mold Block (356-120-TC)
  • Hard-anodized cam-operated sprue plate

Frequently Asked Questions

Does the Lee 6-Cavity Mold come with handles?

No, handles are not included with this mold. You'll need Lee commercial mold handles (part 90005), which are sold separately, to operate the block. The hard-anodized sprue plate does come installed on the mold.

What cartridges can I load with the bullets from this mold?

The 356-120-TC casts a .356 diameter, 120-grain truncated cone bullet suited for 9mm Luger, 38 Super Auto, and 380 ACP. It's a versatile profile that feeds well through semi-auto pistols. You'll size and lube the bullets to your preferred diameter before loading.

Why choose an aluminum mold over cast iron?

Lee's aluminum blocks are rust resistant and heat up and cool down faster than iron or steel, so you reach good casting temperature quickly and start dropping usable bullets after just a few pours. They're also about a third the weight of iron molds, which cuts down on hand fatigue during longer sessions. The trade-off is a bit more care around the sprue plate, but many casters prefer aluminum for exactly these reasons.

Will I need any other equipment to size the bullets?

This mold does not include sizing equipment. For best accuracy and feeding, you'll want a bullet sizing kit, such as Lee's Classic Bullet Sizing Kit (part 90046), plus lube to finish the bullets. A lead pot and alloy round out the basic casting setup.

Additional information

UPC

734307903879

Manufacturer

Manufacturer Part Number

90387

Bullet Weight (Grains)

120

Caliber/Gauge

380 Caliber

Color

6-CAVITY

Length

13

Shipping Weight

1.2188

Reviews

There are no reviews yet.

Be the first to review “Lee 6-Cavity Bullet Mold 356-120-TC .356 120gr 9mm Luger”