Description
The Lee TL356-124-TC is a double cavity aluminum bullet mould built to cast a .356 diameter, 124-grain truncated cone pistol bullet. The truncated cone profile feeds smoothly and sits at the right overall length for 9mm Luger, 38 Super Auto, and 380 Auto loads, which makes this one of the more versatile pistol moulds in the Lee lineup. Two cavities let you drop a pair of bullets per pour, so you can build up a healthy stash without spending all day at the pot.
Why the TL356-124-TC Casts Clean Bullets
Lee machines these mould blocks from aluminum for a good reason. The blocks heat up and cool down faster than iron or steel, so you'll start throwing good, fully filled bullets after just a few casts instead of fighting the mould for the first fifty. The block halves are bored for tight roundness and size control, which is where consistent, accurate bullets come from. Aluminum is also rust resistant and roughly a third the weight of steel, so your hand and wrist hold up better during a long casting run.
Tumble Lube Design Made Simple
This is a TL, or tumble lube, mould. The shallow micro-grooves are made to hold liquid lube like Lee Liquid Alox rather than traditional grease grooves. You coat the cast bullets, spread them out on wax paper to dry, and they're ready to load. It skips the lubri-sizer step a lot of casters would rather avoid, and plenty of folks run these bullets as-cast without sizing at all.
What the Lee 90238 Gives You
The 124-grain weight is right in the sweet spot for 9mm, close to common factory ammo, so it's an easy bullet to work up loads around. One thing worth knowing with aluminum moulds: they ship with a light protective coating, so a quick "smoking" of the cavities and a couple of warm-up casts gets them running right. After that, once the blocks are up to temperature, this mould will keep pace with your melt all day long.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90238
- Model: TL356-124-TC
- UPC: 734307902384
- Cavities: 2 (Double Cavity)
- Bullet Diameter: .356 inch
- Bullet Weight: 124 grains
- Bullet Profile: Truncated Cone, Tumble Lube
- Compatible Cartridges: 9mm Luger, 38 Super Auto, 380 Auto
- Block Material: Aluminum
- Bullet Overall Length: .580 inch
- Country of Origin: United States
- Length: 10.85 inch
What’s Included
- Lee TL356-124-TC double cavity aluminum bullet mould
- Mould handles
- Hard anodized sprue plate
- Instruction sheet
Frequently Asked Questions
What cartridges will the Lee 90238 truncated cone mould load for?
It casts a .356 diameter, 124-grain truncated cone bullet suited for 9mm Luger, 38 Super Auto, and 380 Auto. The 124-grain weight lines up closely with common 9mm factory loads, so it's an easy bullet to develop loads around. The truncated cone nose tends to feed well through most semi-auto pistols.
Is this a tumble lube mould, and do I need to size the bullets?
Yes, the TL356-124-TC uses Lee's tumble lube design with shallow micro-grooves made for liquid lube such as Lee Liquid Alox. You coat the cast bullets, let them dry on wax paper, and they're ready to load. Many casters run these bullets as-cast without a separate sizing step.
Does the Lee 90238 mould come with handles?
It does. Lee includes the mould handles and a hard anodized sprue plate with their 1- and 2-cavity moulds, so you have what you need to start casting. You'll still want a melting pot, lead alloy, and lube to complete the setup.
Why is the mould made of aluminum instead of steel?
Aluminum heats up and cools down much faster than iron or steel, so you'll get good, filled-out bullets after only a few casts. It's also rust resistant and about a third the weight of steel, which cuts down on fatigue during long casting sessions. A quick smoking of the cavities and a couple of warm-up pours gets a new aluminum mould running right.



Reviews
There are no reviews yet.