0
0

Lee .45 Cal (.452) 230gr Truncated Cone 2-Cavity Bullet Mold

UPC: 734307902902

$33.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee .45 Caliber (.452) 230gr Truncated Cone Double Cavity Mold is built for folks who shoot a lot of .45 and want to keep casting costs down. It drops a .452 diameter, 230-grain truncated cone bullet that works well across 45 ACP, 45 Auto Rim, and 45 Colt. The flat-nosed truncated cone profile is a favorite because it feeds reliably in 1911-style pistols while still punching clean holes in paper at the range.

What Sets the Lee 452-230-TC Mold Apart

Lee machines these mold blocks from aluminum, which does a few things in your favor. Aluminum heats up and cools down faster than iron or steel, so you can start dropping good bullets after just a handful of casts and keep a steady rhythm going. It's also roughly a third of the weight of steel blocks, which means a lot less hand and wrist fatigue when you're casting for an afternoon. On top of that, aluminum won't rust, so storage is easy. The cavities are CNC machined for roundness and consistent sizing, and most bullets drop ready to load without needing to be sized first.

Casting Two at a Time with the Lee Double Cavity Mold

The double cavity setup lets you pour two bullets per cast, which roughly doubles your output compared to a single cavity block. For anyone feeding a 1911 or a .45 Colt revolver on a regular basis, that adds up fast over a casting session. The mold comes ready to run right out of the box with handles and a hard anodized sprue plate already included.

Getting Good Bullets from the Start

If you're new to casting, a quick tip that applies to all Lee aluminum molds: avoid spray-on mold release products, since they can build up in the cavity and shrink your bullet diameter. Lee recommends smoking the cavities lightly with a wooden match, a beeswax candle, or a butane lighter before your first pour. Do that, get your melt and mold up to temperature, and this mold tends to drop clean, well-filled bullets in short order. Keep in mind it does not include sizing equipment, so you'll want a separate lube and size kit if your loads call for sizing.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90290
  • UPC: 734307902902
  • Model: 452-230-TC
  • Caliber: .45 Caliber
  • Bullet Diameter: .452 inch
  • Bullet Weight: 230 Grains
  • Bullet Profile: Truncated Cone
  • Cavities: 2 (Double Cavity)
  • Block Material: Aluminum
  • Compatible Cartridges: 45 ACP, 45 Auto Rim, 45 Colt
  • Country of Origin: United States
  • Length: 10.75 in

What’s Included

  • Two aluminum mold block halves (452-230-TC)
  • Hardwood handles
  • Hard anodized sprue plate
  • Bullet mold instructions

Frequently Asked Questions

What cartridges can I load with bullets from the Lee 452-230-TC mold?

This mold casts a .452 diameter, 230-grain truncated cone bullet that's well suited to 45 ACP, 45 Auto Rim, and 45 Colt. The truncated cone profile is especially popular for 1911-style pistols thanks to its smooth feeding. Always confirm your load data in a current reloading manual or from your powder manufacturer before loading.

Does this mold come with handles and a sprue plate?

Yes. The Lee .45 Caliber 230gr Truncated Cone Double Cavity Mold ships with hardwood handles and a hard anodized sprue plate already included, so it's ready to cast right out of the box. It does not come with sizing equipment, so you'll need a separate lube and size kit if your loads require sizing.

Why does Lee use aluminum instead of steel for this mold?

Aluminum heats up and cools down faster than iron or steel, which means you can start producing good bullets after only a few casts. It's also about a third the weight of steel blocks, so there's less fatigue during long casting sessions, and it won't rust. The cavities are CNC machined for consistent roundness and sizing.

Do I need to prep the mold before casting?

A light prep helps a lot. Rather than spray-on mold release, which can build up and reduce your cast bullet diameter, Lee recommends smoking the cavities with a wooden match, a beeswax candle, or a butane lighter before the first pour. Get your mold and melt up to temperature and it tends to drop clean, well-filled bullets quickly.

Additional information

UPC

734307902902

Manufacturer

Manufacturer Part Number

90290

Bullet Weight (Grains)

230

Caliber/Gauge

.45 Caliber

Color

2-CAVITY

Length

10.7500

Shipping Weight

0.8375

Reviews

There are no reviews yet.

Be the first to review “Lee .45 Cal (.452) 230gr Truncated Cone 2-Cavity Bullet Mold”