0
0

Lee 90239 Truncated Cone Bullet Mould .356 120gr 9mm Double Cavity

UPC: 734307902391

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Truncated Cone Pistol Mould puts cast bullet making within easy reach for anyone shooting the .35 caliber family. This double-cavity mould drops .356 diameter projectiles at a nominal 120 grains in a truncated cone profile, which feeds smoothly through semi-autos and stacks nicely for practice volume. It covers 9mm Luger, .38 Super, and .380 Auto out of the same blocks, so one mould keeps several range habits fed.

Lee builds the blocks from machined aluminum, and that choice pays off at the casting bench. Aluminum heats up quickly and sheds heat just as fast between pours, which means you spend less time waiting and more time dropping bullets. It also weighs about a third of what iron or steel blocks do, so your hands and wrists hold up through a longer session. The cavities are lathe bored for tight roundness and size control, and the tangential cutoff helps clean up the sprue so you get less of a nib at the base.

What the Lee 356-120-TC Mould Casts

The truncated cone shape is a workhorse profile for pistol caliber reloading. It gives you a flat meplat for clean paper punching while still feeding reliably through the ramp of most 9mm and .38 Super pistols. Many casters run these straight from the mould without sizing, which keeps the whole process quick once you have an alloy and rhythm dialed in.

Getting Started With the Lee Truncated Cone Mould

Like any new aluminum mould, a short break-in goes a long way. Give the cavities a quick cleaning, smoke them lightly with a candle, then bring the blocks up to temperature with a few throwaway casts before you start keeping bullets. Once it is warmed up, casters commonly report consistent diameters and good fill-out even with wheel weight and similar alloys. Handles and the sprue plate come included, so you are ready to pour as soon as you add a melt and your alloy.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90239
  • UPC: 734307902391
  • Bullet Diameter: .356 inch
  • Bullet Weight: 120 grain (nominal)
  • Bullet Style: Truncated Cone
  • Cavities: 2 (Double Cavity)
  • Compatible Cartridges: 9mm Luger, .38 Super, .380 Auto
  • Block Material: Machined Aluminum
  • Sprue Plate: Hard Anodized
  • Gas Check: No
  • Handles: Included
  • Country of Origin: USA
  • Length: 10.65 in

What’s Included

  • Lee double-cavity aluminum bullet mould (356-120-TC)
  • Hardwood handles
  • Hard anodized sprue plate

Frequently Asked Questions

What cartridges can I load with the Lee Truncated Cone Mould?

This mould casts a .356 diameter 120 grain bullet that works for 9mm Luger, .38 Super, and .380 Auto. The truncated cone profile feeds well through most semi-auto pistols chambered in those rounds. It is a popular choice for high-volume practice and plinking loads.

Does the Lee 90239 mould come with handles?

Yes. The handles and the sprue plate are included, so you do not need to buy them separately. You just add your melt and alloy and you are ready to cast.

Do I need to size the bullets after casting?

Many casters run bullets straight from Lee moulds without sizing, especially when the alloy and diameter match their barrel. If your firearm prefers a slightly different fit, you can size them with a separate sizing die. It comes down to your specific barrel and the alloy you use.

Why aluminum blocks instead of steel or iron?

Aluminum heats up and cools down faster, which speeds up casting and cuts wait time between pours. The blocks are also roughly a third the weight of iron or steel, so there is far less fatigue during long sessions. Aluminum will not rust, though it does call for gentle handling since it is softer than steel.

Additional information

UPC

734307902391

Manufacturer

Manufacturer Part Number

90239

Bullet Weight (Grains)

120

Caliber/Gauge

9mm

Color

2-CAVITY

Length

10.6500

Shipping Weight

0.8375

Reviews

There are no reviews yet.

Be the first to review “Lee 90239 Truncated Cone Bullet Mould .356 120gr 9mm Double Cavity”