Description
The Lee Precision 90295 is a six-cavity bullet mould that drops a .358 diameter, 158-grain semi-wadcutter every pull of the handle. The TL in the name stands for tumble lube, meaning the bullet carries a series of shallow micro grooves designed to be coated with liquid Alox rather than sized and lubed the traditional way. That design is a favorite among folks who want to cast and load without a lube-sizer in the mix, though you can still size and lube these in a press if you prefer. The nose profile and 158-grain weight make it a classic match for 38 Special, 38 S&W, 38 Colt New Police, and 357 Magnum.
Why the Aluminum Blocks on This Lee Mould Matter
Lee builds these blocks from aluminum for good reason. The material heats up and cools down faster than iron or steel, so you'll usually start dropping good, frosty bullets after just a few casts instead of waiting out a long warm-up. Aluminum also runs about a third the weight of steel blocks, which your hands and forearms will thank you for during a long casting session. On top of that, it's naturally rust resistant, so storage is less of a worry.
Built for Volume on the TL358-158-SWC
This is one of Lee's commercial-quality six-cavity moulds, meaning it's made for turning out bullets in real numbers. The blocks ride on steel bushings and alignment pins for lasting precision, and the cavities are CNC machined for tight roundness and consistent size. It comes with a hard-anodized sprue plate that's cam operated, which does away with the mallet-pounding you get on cheaper moulds. Shooters running 38 and 357 through both revolvers and lever guns tend to love how well this one fills out.
One thing worth knowing up front: the handles are not included and are sold separately. Lee's commercial mould handles (part #90005) are the ones you want, and they fit this block along with most other one and two cavity moulds too. Bullet lube and sizing equipment are also separate purchases.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90295
- UPC: 734307902957
- Model: TL358-158-SWC
- Bullet Diameter: .358 inch
- Bullet Weight: 158 grain
- Bullet Style: Semi-Wadcutter (SWC), Tumble Lube
- Number of Cavities: 6
- Caliber Compatibility: 38 Special, 38 S&W, 38 Colt New Police, 357 Magnum
- Block Material: Aluminum
- Sprue Plate: Hard-anodized, cam operated
- Bullet Overall Length: .665 inch
- Ballistic Coefficient: .117
- Country of Origin: United States
What’s Included
- Lee TL358-158-SWC 6-cavity bullet mould block
- Hard-anodized cam-operated sprue plate (attached)
Frequently Asked Questions
Do the handles come with the Lee TL358-158-SWC 6-cavity mould?
No, the handles are sold separately on this one. You'll want Lee's commercial mould handles, part #90005, which fit this six-cavity block. The same handles also work with most of Lee's one and two cavity moulds, so a single set covers a lot of ground.
What does the TL in TL358-158-SWC mean?
TL stands for tumble lube. The bullet is designed with shallow micro grooves meant to be coated with liquid Alox lube by tumbling, rather than running through a lube-sizer. That lets a lot of casters skip the sizing step entirely, though you can still size and lube these conventionally if you'd rather.
What cartridges will the .358 158gr bullets from this mould work in?
The .358 diameter, 158-grain semi-wadcutter is a natural fit for 38 Special and 357 Magnum, and it also works in 38 S&W and 38 Colt New Police. It performs well in both revolvers and lever-action rifles chambered for those rounds. It's a time-tested bullet weight and profile for plinking, practice, and general range use.
Why aluminum blocks instead of steel on this Lee mould?
Aluminum heats and cools faster than iron or steel, so you get good bullets after just a few warm-up casts. It also weighs about a third of what steel blocks do, which cuts down on fatigue during long casting runs. As a bonus, aluminum resists rust, making the mould easier to store.




Reviews
There are no reviews yet.