Description
If you shoot .303 British, or anything else that takes a .312" projectile, this Lee double cavity mould is one of the most affordable ways to start rolling your own cast bullets. It drops a 185 grain round nose bullet with a 1 ogive radius and a gas check base, which is exactly the kind of profile that old Enfields and similar surplus rifles tend to like. Two cavities means you pour twice the bullets per pass, and the handles are already in the box so there's nothing extra to buy before your first casting session.
What Makes the Lee 90371 Mould Worth Pouring
Lee machines these blocks from aluminum for good reason. The metal heats up and cools down quickly, so you get usable bullets after just a few casts instead of a long warm up. Aluminum also won't rust and weighs about a third of what iron or steel blocks do, which keeps your arm from wearing out during a longer session at the pot. The cavities are lathe bored with the block halves clamped together, giving you tight roundness and consistent diameter from cavity to cavity.
Getting the Most From Your .312 185 Grain Round Nose Mould
These bullets are designed to be sized and gas checked, and reloaders commonly run them at .312 or .311 depending on the throat of the particular rifle. The gas check seats and crimps during sizing, which helps keep leading down at rifle velocities. A quick tip worth knowing: skip the spray release agents and instead smoke the cavities with a wooden match, candle, or butane lighter before you cast. That light coat of soot helps the bullets drop clean and fill out the way they should.
Why Casters Keep Reaching for the Lee C312-185-1R
Aluminum blocks are a bit softer than steel, so a gentle break in and careful handling go a long way toward a mould that lasts for years. Folks running old No. 4 Enfields and other two groove .303s report these bullets fly accurately once properly sized, which is a big part of why this mould keeps showing up in reloading benches everywhere.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90371
- Model: C312-185-1R
- UPC: 734307903718
- Bullet Diameter: .312"
- Bullet Weight: 185 Grains
- Bullet Profile: Round Nose, 1 Ogive Radius
- Base Type: Gas Check
- Cavity Count: Double (2) Cavity
- Block Material: Aluminum
- Common Cartridge: .303 British
- Handles: Included
- Country of Origin: United States
What’s Included
- Lee double cavity bullet mould block (.312" 185gr round nose)
- Mould handles
- Sprue plate
Frequently Asked Questions
What cartridge is the Lee 90371 mould designed for?
This mould casts a .312" 185 grain round nose bullet that's most commonly used in .303 British. Plenty of casters also run these bullets in other rifles that take a .311 or .312 projectile. Sizing the bullet to match your specific barrel is the key to good accuracy.
Does the .312 185 grain round nose mould take a gas check?
Yes, this bullet is a gas check design. The gas check seats and crimps onto the base during the sizing step, which helps reduce leading at rifle velocities. You'll want the matching gas checks and a sizing die to finish the bullets.
Does the Lee 90371 come with handles?
It does. The handles are included in the box along with the mould blocks and sprue plate, so you can start casting without buying anything extra. Just add your lead pot, alloy, and a gas check sizing setup.
How should I break in this aluminum mould?
Aluminum blocks are a little softer than steel, so handle them gently during that first session when they're most vulnerable. Wash and dry the cavities, then smoke them with a wooden match, candle, or butane lighter rather than using spray release agents. As the mould heats up with casting, your bullet fill out and quality will improve.




Reviews
There are no reviews yet.