0
0

Lee Precision CTL312-160-2R Double Cavity Mould, .312 160 gr RN

UPC: 734307903619

$33.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision CTL312-160-2R is a double cavity bullet mould built to drop a .312 diameter, 160 grain round nose bullet, a classic fit for 7.62×39 and other .30-caliber rifles that run on the fatter groove diameter. Lee lists the finished bullet at .960 inches overall length with the crimp groove sitting .653 inches back from the nose, so it feeds and crimps the way a 7.62×39 reloader expects. The two-cavity setup lets you pour a matched pair of bullets with every cast, which keeps your session moving without jumping up to the cost of a six-cavity block.

Why the Aluminum Blocks on the CTL312-160-2R Make Sense

Like all of Lee's moulds, the blocks are machined from aluminum rather than iron or steel. That choice pays off a few ways: aluminum heats and cools faster, so you get usable bullets after just a few throwaway casts, and it resists rust between sessions. The blocks weigh roughly a third of what iron equivalents do, which your hands and forearms will thank you for during a long run at the pot. The cavities are CNC machined for roundness and consistent sizing, and the mould face uses Lee's trochoidal venting to help the alloy fill out clean and complete.

Loading the 160 Grain Round Nose

This is the plain-base round nose design, not the gas-check version, so it's a straightforward bullet to cast and load. Most folks slug their bore first and size to about .001 over groove diameter for the best accuracy and least leading, though plenty of shooters run these as-cast when their bore measures right. The 160 grain weight is a well-traveled load in 7.62×39 and works equally well in a bolt gun or an SKS when you match your powder charge to the rifle. Keep in mind the weights Lee lists assume their suggested alloy, so your actual bullet weight will shift a little depending on what you're melting down.

Made in the USA, this mould ships with handles and the sprue plate attached so there's nothing extra to buy before your first pour.

Key Specifications

  • Manufacturer: Lee Precision
  • Model: CTL312-160-2R
  • Manufacturer Part Number: 90361
  • UPC: 734307903619
  • Bullet Diameter: .312 in
  • Bullet Weight: 160 Grains
  • Bullet Style: Round Nose, Plain Base
  • Caliber: 7.62mm / 7.62×39
  • Cavities: Double (2)
  • Block Material: Aluminum
  • Bullet Overall Length: .960 in
  • Crimp Groove to Nose: .653 in
  • Country of Origin: United States

What’s Included

  • Lee CTL312-160-2R double cavity mould blocks
  • Mould handles
  • Sprue plate (attached)

Frequently Asked Questions

What cartridges does the CTL312-160-2R mould work with?

It casts a .312 diameter, 160 grain round nose bullet that's a natural fit for 7.62×39 in both SKS and bolt rifles. Because the bullet runs .312, a lot of reloaders also size it down for other .30-caliber work like .303 British or .308, depending on their bore. Slug your barrel first so you know the exact groove diameter you're sizing to.

Is this a gas-check mould?

No, the 90361 (CTL312-160-2R) is the plain-base round nose version. Lee makes a separate gas-check design in a similar weight if that's what you're after, but this mould drops a standard plain-base bullet ready for lube or powder coating.

Does the Lee .312 mould come with handles?

Yes. This double cavity mould ships with the handles and sprue plate included, so you have everything you need to start casting. The handles fit the blocks right out of the box with no extra purchase required.

Why does Lee use aluminum blocks instead of steel?

Aluminum heats and cools faster than iron or steel, so you reach good casting temperature quickly and get usable bullets after only a few warm-up pours. It's also about a third the weight, which cuts down on arm fatigue during long sessions, and it won't rust between uses. The tradeoff is that aluminum calls for a little extra care to avoid dings on the mating faces.

Additional information

UPC

734307903619

Manufacturer

Manufacturer Part Number

90361

Bullet Weight (Grains)

160

Caliber/Gauge

7.62MM

Shipping Weight

0.6313

Reviews

There are no reviews yet.

Be the first to review “Lee Precision CTL312-160-2R Double Cavity Mould, .312 160 gr RN”