Description
The Lee Precision 90369 is a double cavity bullet mold that drops a .309 diameter, 180 grain round nose gas check bullet, cataloged by Lee as the C309-180-R. It's a popular weight and profile for the 30 caliber crowd, feeding everything from 30-30 Winchester to 308 and 30-06 handloads. Two cavities means you're casting bullets in pairs, which adds up fast when you're trying to build a decent stash for range time or hunting season. Lee lists the cast bullet length at right around .958 inches, and the gas check design helps keep leading down when you push these a little harder.
What Sets the Lee C309-180-R Mold Apart
Like the rest of Lee's lineup, this mold is machined from aluminum rather than iron or steel. That matters more than it sounds. Aluminum heats up and cools off quickly, so you're casting good bullets after just a handful of throwaway pours, and the lighter blocks mean your arm isn't screaming after a long session at the pot. Aluminum also resists rust, so the cavity won't corrode on you between uses. The block halves are clamped together and bored as a unit for consistent roundness and sizing, and many folks run these bullets as cast without a separate sizing step.
Getting the Most From Your 90369 Bullet Mold
Like any new mold, this one wants a proper break-in before it really sings. Give the cavity a good cleaning, dry it, and smoke the cavity and underside of the sprue plate with a wooden match, candle, or butane lighter before your first casts. Skip the aerosol mold releases, since they can build up and shrink your bullet diameter over time. Cast a few, let the mold come up to temperature, and you'll start seeing nicely filled out bullets. Alloy mix plays a role in final weight too, so don't be surprised if wheel weight metal runs a grain or two off the stated 180.
If you're already casting for your 30 caliber rifles or just getting into it, the 90369 is an easy, dependable workhorse that won't break the bank.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90369
- Model Designation: C309-180-R
- UPC: 734307903695
- Caliber: .30 Caliber
- Bullet Diameter: .309 in
- Bullet Weight: 180 Grains
- Bullet Profile: Round Nose, Gas Check
- Cavity Count: Double Cavity
- Cast Bullet Length: 0.958 in
- Block Material: Aluminum
- Country of Origin: USA
What’s Included
- Lee Precision 90369 double cavity bullet mold blocks
- Mold handles
- Sprue plate
- Instructions
Frequently Asked Questions
What bullet does the Lee 90369 mold produce?
It casts a .309 diameter, 180 grain round nose bullet with a gas check base, listed by Lee as the C309-180-R. The finished bullet runs about .958 inches in length. It's a common profile for 30 caliber rifle cartridges like 30-30, 308 Winchester, and 30-06.
Does the Lee Precision 90369 come with handles?
Yes. Handles and the sprue plate are included with this double cavity mold, so you have what you need to start casting out of the box. You'll still need your own melting pot, alloy, and gas checks to complete the setup.
Why is the mold made from aluminum instead of steel?
Aluminum heats and cools faster than iron or steel, so you can get good bullets after just a few warm-up casts. The blocks are also about a third the weight of steel, which cuts down on fatigue during long casting sessions, and aluminum won't rust on you. Lee bores the clamped block halves together for consistent roundness.
Do I need to size bullets cast from the 90369?
Many casters run Lee bullets as cast without a separate sizing step, since the cavities are bored for tight roundness. That said, your results depend on your alloy and your rifle's throat, so slugging your bore is a smart move. Since this is a gas check design, you'll also want to seat gas checks before loading.



Reviews
There are no reviews yet.