Description
The Lee Precision C309-120-R is a double cavity mold built for folks who want to cast their own .30 caliber rifle bullets at home. Each pour drops two .309 diameter, 120-grain round nose projectiles with a gas check base, making it a great fit for lighter .30 cal loads in cartridges like .30-30, .308, .30-06, and 7.62×39. The finished bullet runs .665 inches overall with the first lube groove sitting .215 inches back from the nose, so you have plenty of room to seat gas checks and run them through a sizer and lube setup.
Why Casters Reach for the C309-120-R Mold
Lee builds these blocks out of aluminum, and that choice pays off at the casting bench. The blocks heat up and cool down faster than iron or steel, which means you spend less time waiting and get usable bullets after just a few throwaway pours. Aluminum is also about a third the weight of steel, so long casting sessions are easier on your hands and wrists. The cavities are CNC machined for tight roundness and size control, and the trochoidal venting cut into the mold face helps the metal fill out clean and complete every time.
Getting Good Bullets From Your .309 120gr Mold
Double cavity molds are the sweet spot for most home casters, letting you double your output without the bulk of a six-cavity setup. Run your alloy hot, keep a steady rhythm, and these blocks will rain out consistent round nose bullets ready for sizing. Keep in mind the 120-grain weight is based on Lee's suggested alloy, so your actual bullet weight will shift a bit depending on the lead mix you run. A little break-in and a clean mold go a long way toward frosty, well-filled bullets.
Handles are included with this mold, so you can get casting right away. Gas checks and your sizing and lube gear are picked up separately, letting you tailor the finished bullet to your rifle.
Key Specifications
- Manufacturer: Lee Precision
- Model: C309-120-R
- Manufacturer Part Number (MPN): 90364
- UPC: 734307903640
- Caliber: .30 Caliber
- Bullet Diameter: .309 inches
- Bullet Weight: 120 grains (with Lee's suggested alloy)
- Bullet Style: Round Nose, Gas Check
- Cavities: Double (2)
- Block Material: Aluminum
- Bullet Overall Length: .665 inches
- Nose to First Lube Groove: .215 inches
- Handles: Included
- Country of Origin: Made in USA
What’s Included
- Lee Precision C309-120-R double cavity mold blocks
- Sprue plate
- Mold handles
Frequently Asked Questions
Is the Lee C309-120-R a gas check mold?
Yes, this mold produces a gas checked .309 diameter 120-grain round nose bullet. You'll need to pick up gas checks separately since they do not come with the mold. Seating a gas check on the base helps protect the bullet when pushed to higher velocities.
Do I need to buy handles for this mold?
No, handles are included with the C309-120-R, so you can start casting as soon as it arrives. You will still want a sizing and lubing setup along with gas checks to finish the bullets. Many casters pair these blocks with a Lee sizing kit sized to .309.
What cartridges can I use the .309 120gr bullets in?
These lightweight .309 round nose bullets work well in a range of .30 caliber rifles, including .30-30, .308 Winchester, .30-06, and 7.62×39. Always check your reloading manual or a powder manufacturer's website for proper cast bullet load data before working up a load. The light 120-grain weight is popular for reduced recoil and plinking loads.
Why does Lee use aluminum for the mold blocks?
Aluminum heats up and cools down faster than iron or steel, so you get good bullets after only a few casts and spend less time waiting. The blocks are also about a third the weight of steel molds, which cuts down on hand fatigue during long sessions. The cavities are CNC machined for tight roundness and consistent sizing.




Reviews
There are no reviews yet.