Description
The Lee Precision 452-228-1R Double Cavity Mould is a straightforward, workhorse casting tool for anyone running .45 caliber pistol bullets. It drops .452 diameter 228 grain round nose bullets two at a time, which keeps your casting sessions moving along once your pot is up to temperature. That projectile works across the common .45 lineup, including .45 ACP, .45 Auto Rim, and .45 Colt, so a single mould covers a lot of ground for the average handloader.
What Sets the 452-228-1R Mould Apart
Like the rest of the Lee mould family, the blocks here are machined from aluminum rather than iron or steel. That matters more than it sounds. Aluminum heats up and cools down quickly, so you spend less time babying the mould and reach good, consistent fill-out after just a handful of pours. It also stays rust resistant and is lighter in the hand during longer sessions. The cavities are CNC machined for roundness and sizing, and a 1 ogive radius gives you that classic round nose profile with a bullet overall length of roughly .628 inches and a ballistic coefficient around .145.
Casting With the Lee 228 Grain Round Nose Mould
Folks who have run this mould tend to report it casts close to spec right out of the box, with bullet weights landing near the advertised 228 grains once you're using an appropriate alloy. As with any aluminum mould, a short break-in and a clean, degreased set of cavities go a long way toward clean, filled-out bullets. Your actual weight and diameter will shift a little depending on the alloy you pour, which is normal and worth checking against your reloading manual before you load.
Handles come included with this double cavity version, so you aren't hunting for extra parts before your first casting session. Pair it with a lead pot, sizing setup if your load calls for it, and quality lube or coating, and you've got a reliable way to keep feeding your .45 without leaning on bullet availability at the counter.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90351
- Model: 452-228-1R
- UPC: 734307903510
- Mould Type: Double Cavity
- Bullet Diameter: .452 inch
- Bullet Weight: 228 grains
- Bullet Style: Round Nose (1 Ogive Radius)
- Caliber/Gauge: .45 Caliber (.45 ACP, .45 Auto Rim, .45 Colt)
- Block Material: Aluminum
- Bullet Overall Length: .628 inch
- Ballistic Coefficient: .145
- Gas Check: No
- Country of Origin: United States
What’s Included
- 452-228-1R double cavity mould blocks
- Sprue plate
- Mould handles
Frequently Asked Questions
What cartridges will the Lee 452-228-1R mould work with?
This mould drops a .452 diameter 228 grain round nose bullet that suits the common .45 caliber pistol rounds, including .45 ACP, .45 Auto Rim, and .45 Colt. It's a versatile choice if you load more than one .45 cartridge. Always confirm your load data against a current reloading manual for the exact cartridge you're building.
Does this Lee Precision mould come with handles?
Yes. This double cavity version includes the handles and sprue plate, so you have what you need to start casting without buying extra parts. That's one of the perks of the double cavity Lee moulds compared to some of the six cavity versions, which sell handles separately.
How many bullets does the double cavity mould cast at once?
The 452-228-1R is a double cavity mould, so it drops two bullets per pour. That roughly doubles your output compared to a single cavity mould and keeps a casting session moving once your pot is up to temperature.
Will the bullets need to be sized after casting?
Many Lee moulds cast bullets that can be used as cast, but whether you size depends on your particular firearm's chamber and bore, your alloy, and your lube or coating method. It's worth miking a few cast bullets and comparing them to what your barrel likes. A sizing die and lube setup are sold separately if your load calls for them.




Reviews
There are no reviews yet.