Description
The Lee 457-340-F is a double-cavity bullet mould built for folks who shoot the 45-70 and want to keep their big-bore rifle fed without paying retail for cast bullets. It drops a .457 diameter, 340 grain flat nose projectile, which is a versatile weight that works well across a range of loads from plinking to hunting-level charges. The flat nose profile feeds reliably in lever guns and transfers energy nicely downrange.
Why the Lee 457-340-F Aluminum Blocks Make Sense
Lee machines these mould blocks from aluminum rather than iron or steel, and there's a real practical reason for that. Aluminum heats up and cools down faster, so you can usually start dropping good bullets after just a few casts instead of babying the mould up to temperature for ages. It's also about a third the weight of a comparable iron mould, which your hands will thank you for during a long casting session. The blocks are rust resistant and CNC machined for consistent roundness and sizing cavity to cavity.
What the .457 340gr Double Cavity Mould Handles
This one is a natural fit for the 45-70 Government, and it also covers other .45 caliber rifle rounds like the 45-90 Sharps and 45-90 WCF. The two cavities let you pour a pair of bullets with every cast, which adds up fast when you're loading in volume. Keep in mind the stated 340 grain weight is based on Lee's suggested alloy, so your real-world weight can shift a little depending on what you're melting down.
Getting Started With the Lee 90373 Mould
The mould ships with handles and a sprue plate, so you have what you need to start casting once your pot is hot. It does not include sizing or lube equipment, so if your bullets need sizing or you plan to lube them, you'll want to pair it with a separate lube and size kit. For a cast bullet shooter who likes feeding their 45-70, this is a dependable, no-nonsense way to make quality bullets at home.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90373
- UPC: 734307903732
- Bullet Diameter: .457 inch
- Bullet Weight: 340 grains
- Bullet Profile: Flat Nose
- Cavities: 2 (Double Cavity)
- Mould Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Suggested Cartridges: 45-70 Government, 45-90 Sharps, 45-90 WCF
- Country of Origin: United States
- Overall Length: 10.85 in
What’s Included
- Lee 457-340-F double-cavity aluminum mould blocks
- Handles
- Sprue plate
Frequently Asked Questions
What cartridges does the Lee 457-340-F mould work with?
This mould casts a .457 diameter, 340 grain flat nose bullet that's a great match for the 45-70 Government. It also works for other .45 caliber rifle rounds like the 45-90 Sharps and 45-90 WCF. Always confirm your load data against a current reloading manual for the cartridge you're building.
Does the Lee 90373 mould come with handles?
Yes, the handles and sprue plate are included, so you have the core setup needed to start casting once your lead pot is up to temperature. You will still need a lead melting pot and a ladle or bottom-pour furnace, which are not part of this kit.
Will my cast bullets weigh exactly 340 grains?
The 340 grain figure is based on Lee's suggested alloy, and actual weight can vary a bit depending on the mix you're casting with. Harder alloys with more tin or antimony tend to drop slightly lighter bullets, while pure or softer lead runs heavier. A little variation is normal and expected with any cast bullet mould.
Does this mould include sizing or lube equipment?
No, the 457-340-F mould does not come with sizing or lube gear. Many cast bullets can be loaded as-cast, but if your bullets need to be sized down or you want to add lube, you'll need a separate lube and size kit. Aluminum blocks like these also heat and cool faster than iron, so you'll be dropping usable bullets fairly quickly.



Reviews
There are no reviews yet.