0
0

Lee Precision .45 Cal (.452″) 200gr Round Flat Nose Bullet Mould

UPC: 734307902346

$33.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Casting your own bullets is one of the best ways to stretch a reloading budget, and the Lee Precision .45 Cal 200gr Round Flat Nose mould is a workhorse for the .452 diameter crowd. It drops a 200 grain flat nose slug that feeds well and shoots clean in a range of handguns, making it a popular pick for anyone running volume through a .45.

What the Lee .452 200gr RNFP Mould Casts

This double cavity block produces a .452 diameter 200 grain round nose flat point bullet that works across cartridges like 45 ACP, 45 Auto Rim, and 45 Colt. Running two cavities means you pour two bullets per cycle, which adds up fast once the pot is up to temp. Keep in mind the listed weight is based on Lee's suggested alloy, so your finished bullets may come in a touch heavier or lighter depending on the lead-to-tin ratio you cast with.

How the Lee Precision Double Cavity Mould Is Built

Lee machines the mould blocks from aluminum, which keeps them rust resistant and roughly a third the weight of iron or steel blocks. That lighter weight means less hand fatigue during long casting sessions, and the aluminum heats up and cools down quickly so you get good bullets after only a handful of warm-up pours. The cavities are CNC machined for roundness and consistent sizing, and a tangential cutoff on the sprue plate helps reduce the little nip left at the base of each bullet.

Getting the Most Out of Your Lee .45 Cal Mould

Like most aluminum moulds, this one casts best once it is properly heated and lightly smoked with carbon in the cavities, which helps the bullets release clean. Expect to toss the first batch back in the pot while the block comes up to temperature, then watch it settle into a steady rhythm of well-filled, correctly sized slugs. Many casters have run thousands of bullets through these blocks without complaint, which is why this mould has such a loyal following among folks who shoot a lot of .45.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90234
  • UPC: 734307902346
  • Caliber: .45 Caliber
  • Bullet Diameter: .452"
  • Bullet Weight: 200 Grains
  • Bullet Style: Round Flat Nose (RNFP)
  • Cavities: Double Cavity (2)
  • Block Material: Aluminum
  • Sprue Plate: Hard Anodized
  • Gas Check: No
  • Compatible Cartridges: 45 ACP, 45 Auto Rim, 45 Colt
  • Country of Origin: United States

What’s Included

  • Two aluminum mould block halves
  • Hardwood handles
  • Hard anodized sprue plate

Frequently Asked Questions

Does the Lee .45 Cal 200gr mould come with handles?

Yes. This double cavity mould ships with hardwood handles and a hard anodized sprue plate included. You will need a lead pot, ladle or bottom-pour furnace, and casting alloy to get started, but the mould itself is ready to attach and run out of the box.

What cartridges can I load with these .452 200 grain bullets?

The .452 diameter 200 grain round flat nose bullet is a great fit for 45 ACP, 45 Auto Rim, and 45 Colt. It is a popular weight for target and plinking loads where a flat nose profile cuts clean holes in paper. Always check your reloading manual for the correct load data for your specific cartridge.

Why are my first bullets coming out wrinkled or incomplete?

That is normal with any new aluminum mould. The block needs to reach casting temperature before it fills out properly, so plan to drop the first handful back in the pot while it heats up. Lightly smoking the cavities with a carbon source, like the soot from a wooden match, also helps the bullets release cleanly and fill out better.

Will my finished bullets weigh exactly 200 grains?

The 200 grain figure is based on Lee's suggested alloy. Your actual bullet weight can vary slightly depending on your alloy mix, since a softer, lead-heavy blend tends to run a bit heavier. Weighing a sample batch is the best way to know what you are working with before developing a load.

Additional information

UPC

734307902346

Manufacturer

Manufacturer Part Number

90234

Bullet Weight (Grains)

200

Caliber/Gauge

.45 Caliber

Shipping Weight

0.9813

Reviews

There are no reviews yet.

Be the first to review “Lee Precision .45 Cal (.452″) 200gr Round Flat Nose Bullet Mould”