Description
Casting your own pistol bullets is one of the most satisfying ways to stretch a range budget, and the Lee Precision 358-125-RF is a go-to mold for anyone shooting .38 or .357. This double cavity unit drops a .358" diameter, 125 grain round nose bullet that feeds a whole family of revolver and lever cartridges, including .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police. The 125 grain weight makes it a favorite for lighter recoiling plinking loads and general target work.
What the 358-125-RF Mold Casts
Each pour gives you a round nose bullet with a ballistic coefficient of .116 and an overall length right around .540 inches. The two cavities let you double your output every cycle, which adds up fast when you're trying to fill a few hundred rounds for a weekend at the range. Lee machines the cavities to tight roundness tolerances, so most bullets drop ready to load after sizing, and plenty of casters powder coat them for cleaner shooting.
Why Casters Reach for the Lee 358-125-RF
The blocks are cut from aluminum, which is the real advantage here. Aluminum heats up quickly when you start a casting session and sheds heat fast between pours, so you spend less time waiting and your hands stay less fatigued over a long run. It's also rust resistant and light enough to carry in a tote with the rest of your gear. The design includes venting on the mold face that helps the alloy fill out cleanly, which means fewer rejected bullets once the blocks are up to temperature.
Handles are included with this mold, so you've got everything you need to start dropping bullets once you add lead, a melting pot, and a bit of patience during the warm-up period. Like any aluminum mold, it rewards a proper break-in and a few throwaway casts to get the blocks heat soaked before the good ones start falling.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90574
- Model: 358-125-RF
- UPC: 734307905743
- Bullet Diameter: .358 inches
- Bullet Weight: 125 grains
- Bullet Style: Round Nose
- Cavities: 2 (Double Cavity)
- Block Material: Aluminum
- Compatible Calibers: .38 Special, .357 Magnum, .38 S&W, .38 Colt New Police
- Ballistic Coefficient: .116
- Bullet Overall Length: .540 inches
- Handles Included: Yes
What’s Included
- Lee 358-125-RF double cavity bullet mold blocks
- Mold handles
- Sprue plate
Frequently Asked Questions
What cartridges will the Lee 358-125-RF mold work with?
The .358" 125 grain round nose bullet this mold casts is a great fit for .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police. That makes it a versatile choice if you shoot more than one revolver chambering. The lighter 125 grain weight is especially popular for low recoil target and plinking loads.
Do I need to buy handles separately for the 90574 mold?
No, handles are included with this double cavity mold. That's one of the nice things about Lee's two cavity pistol molds compared to their six cavity versions, which require handles to be purchased separately. You'll still need a melting pot and lead alloy to get started.
Can I shoot these bullets without sizing them?
Lee machines the cavities to tight roundness, and many casters find the bullets drop close enough to load as-is. That said, running them through a sizing die is common practice for consistency, and it's a must if you plan to powder coat. Checking a few with a caliper when you first start casting is always a smart move.
Why does the Lee 358-125-RF use aluminum blocks instead of steel?
Aluminum heats up quickly and cools down fast, which speeds up your casting cycle and reduces hand fatigue over a long session. It's also lightweight and rust resistant, so storage is easy. The trade-off is that aluminum molds benefit from a careful warm-up and break-in before the blocks start dropping consistent bullets.





Reviews
There are no reviews yet.