Description
The Lee TL356-95-RF is a double cavity mold that drops .356 diameter, 95 grain flat nose bullets sized for 9mm Luger, 380 Auto, and 38 Super Auto. It's one of Lee's go-to pistol molds for folks who want to feed their range sessions without buying bullets by the box, and the price of entry on casting your own has always been part of the appeal here.
Why the Aluminum Blocks Matter
Lee machines these mold blocks from aluminum, which makes them rust resistant and roughly a third the weight of iron or steel blocks. That lighter build means less hand and arm fatigue during long casting sessions, and aluminum heats up and cools down faster than heavier metals. In practice, you'll be dropping good, fully filled bullets after just a few casts once the blocks come up to temperature. The halves are CNC machined for consistent roundness and sizing, which is what you want when you're trying to keep weights and diameters uniform across a casting run.
What the TL356-95-RF Casts
This one produces a 95 grain flat nose profile with a bullet overall length of about .405 inches. The TL designation points to a tumble lube style design, so it plays nicely with Lee Liquid Alox, though plenty of casters powder coat these too. The double cavity setup lets you pour two bullets per fill, which is a solid middle ground between a single cavity learner mold and the faster six cavity blocks if you're cranking out volume.
Handles Come With It
A nice touch that casters appreciate is that the hardwood handles are included, so you don't have to source them separately like you do with some of the larger Lee molds. Feedback from reloaders is consistent: it heats up quickly, it's easy to run, and it turns out clean bullets once it's warmed up. If you're reloading 9mm or 380 for practice and plinking, this is a dependable, affordable way to keep your lead supply going.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90601
- Model: TL356-95-RF
- UPC: 734307906016
- Cavities: 2 (Double Cavity)
- Bullet Weight: 95 Grains
- Bullet Diameter: .356 inches
- Bullet Style: Flat Nose
- Bullet Overall Length: .405 inches
- Suggested Calibers: 9mm Luger, 380 Auto, 38 Super Auto
- Block Material: Aluminum
- Handles Included: Yes (Hardwood)
- Gas Check: No
- Country of Origin: United States
- Length: 10.75 inches
What’s Included
- Lee TL356-95-RF double cavity bullet mold
- Hardwood mold handles
Frequently Asked Questions
What calibers can I load with bullets from the Lee TL356-95-RF mold?
This mold casts a .356 diameter bullet, which is sized for 9mm Luger, 380 Auto, and 38 Super Auto. The 95 grain flat nose profile is a common pick for light practice and plinking loads in these cartridges. As always, work up your loads from published data for the cartridge you're loading.
Do the handles come with this Lee mold?
Yes. The hardwood handles are included in the box with this double cavity mold, so you can start casting right away. That's a plus over Lee's six cavity blocks, which require handles to be purchased separately.
Why does the mold cast better after a few pours?
Aluminum blocks need to reach casting temperature before they fill out cleanly, so the first few bullets may come out with rounded or incomplete bases. Once the mold is up to heat, it drops nicely filled, sharp-based bullets. Pre-heating the mold speeds this up.
Does this bullet require a gas check?
No, the 95 grain flat nose design from this mold does not use a gas check. It's a tumble lube style bullet, so it works well with Lee Liquid Alox, and many casters also powder coat these with good results.




Reviews
There are no reviews yet.