Description
If you shoot a lot of .38 Special or .357 Magnum and you're tired of buying bullets by the box, this Lee six-cavity mould is how you take casting into high gear. It drops a .358 diameter, 158 grain round flat nose bullet, which is the bread-and-butter profile for revolver loads and lever guns chambered in .38 and .357. Six cavities means you're pouring six bullets per cycle instead of one or two, so a single afternoon at the pot can fill a lot of ammo cans.
The blocks are CNC machined from aluminum, which heats up quickly, cools fast, and resists rust far better than iron or steel. Steel bushings and alignment pins keep the halves lined up cast after cast, so your bullets stay consistent instead of drifting out of round. The cam-operated sprue plate is hard anodized and held in place with tempered steel spring washers, giving you clean sprue cuts without the hammering you get on cheaper molds.
What the Lee 90692 Mould Actually Casts
The round flat nose design is a versatile one. That flat point loads flush in a revolver cylinder and feeds reliably through tubular magazine lever actions, which is why it's a favorite for Cowboy Action work and general plinking alike. The finished bullet runs about .630 inches overall with the crimp groove sitting roughly .27 inches back from the nose. It's suited to .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police.
Getting the Most From This Six-Cavity Mould
Like any aluminum mould, it casts best once it comes up to temperature. Give it a few sacrificial pours to warm the blocks and you'll see bullets start dropping clean and filling out sharp. One thing worth knowing up front: this is a mould block set, so you'll need Lee six-cavity handles to run it. If you're already set up for high-volume casting, you probably have them. If this is your first six-banger, grab a set of handles to go with it and you're ready to pour.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90692
- UPC: 734307906924
- Bullet Diameter: .358"
- Bullet Weight: 158 grain
- Bullet Profile: Round Flat Nose (RF)
- Cavities: 6
- Caliber/Cartridges: .38 Special, .357 Magnum, .38 S&W, .38 Colt New Police
- Block Material: Aluminum, CNC machined
- Sprue Plate: Hard anodized, cam operated with spring washers
- Bullet Overall Length: .630"
- Crimp Groove to Nose: .27"
- Length: 13.45"
- Shipping Weight: 1.15 lbs
- Country of Origin: United States
What’s Included
- Lee 90692 six-cavity mould blocks
- Cam-operated hard anodized sprue plate
Frequently Asked Questions
Does the Lee 90692 mould come with handles?
No, handles are sold separately for this six-cavity mould. You'll need a set of Lee six-cavity handles to run it. If you already cast with other Lee six-cavity blocks, your existing handles will work fine.
What cartridges can I load with the bullets this mould casts?
It produces a .358 diameter, 158 grain round flat nose bullet suited for .38 Special, .357 Magnum, .38 S&W, and .38 Colt New Police. The flat point also feeds well through tubular magazine lever guns chambered in .38 and .357, which makes it popular for Cowboy Action and general range use.
Why is the mould made from aluminum instead of steel?
Aluminum blocks heat up and cool down faster than iron or steel, which speeds up your casting rhythm and helps you fall into a consistent cycle. They also resist rust, so storage is low maintenance. The tradeoff is simply letting the blocks reach full temperature before you expect perfectly filled bullets.
How many bullets does the six-cavity design produce per pour?
Each pour fills all six cavities, so you get six bullets per cast cycle. That's a big jump in throughput over single or double cavity molds and makes this a solid choice if you burn through a lot of .38 or .357 ammo. Once the mould is up to temp, you can move quickly.




Reviews
There are no reviews yet.